2023

1. FERREIRA, I. L. ; Garcia, A. ; MOREIRA, A. L. S. . On the Multiscale Formulation and the Derivation of Phase-Change Moving Interfaces. INTERNATIONAL JOURNAL OF THERMOPHYSICS, v. 44, p. 2, 2023.

2. SOBRAL, BRUNO SILVA ; VIEIRA, PÂMALA SAMARA ; LIMA, THIAGO SOARES ; Spinelli, José Eduardo ; Cheung, Noé ; Garcia, Amauri ; SILVA, BISMARCK LUIZ . Effects of Zn addition on dendritic/cellular growth, phase formation and hardness of a Sn-3.5wt.%Ag Solder Alloy. ADVANCED ENGINEERING MATERIALS, v. 25, p. 2201270, 2023.

3. DIAS, MARCELINO ; BOGNO, ABDOUL AZIZ ; SPINELLI, JOSE EDUARDO ; OLIVEIRA, RICARDO ; Cheung, Noe ; Garcia, Amauri ; Henein, Hani . Microstructure and Hardness of an Al-8-wt%Si-2.5-wt%Bi Alloy Subjected to Solidification Cooling Rates from 0.1 to 800-K-s −1. ADVANCED ENGINEERING MATERIALS, v. 25, p. 2201060, 2023.

4. RODRIGUES, A. V. ; KAKITANI, R. ; SILVA, C. A. P. ; GIOVANETTI, L. ; DIAS, M. ; HENEIN, H. ; GARCIA, A. ; CHEUNG, N. . Influence of minor additions of Be on the eutectic modification of an Al-33wt.%Cu alloy solidified under transient conditions. Metals, v. 13, p. 49, 2023.

5. MOURA, DANUSA ARAÚJO DE ; GOMES, LEONARDO FERNANDES ; SIQUEIRA, CLAUDIO ALVES ; Garcia, Amauri ; Spinelli, José Eduardo . Understanding solidification and wear behaviour of Al-3Cu-Bi alloys. MATERIALS SCIENCE AND TECHNOLOGY, v. 39, p. 694-704, 2023.

6. SILVA, A. S. ; SOUSA, S. M. A. ; GOUVEIA, GUILHERME LISBOA ; Garcia, A. ; SPINELLI, J. E. . The influence of NbB inoculation on dendritic spacing and grain size of an aluminum 2017 alloy at different cooling rates. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, v. 125, p. 5681-5696, 2023.

7. KAKITANI, R. ; RODRIGUES, A.V. ; SILVA, C. ; Garcia, A. ; CHEUNG, N. . The roles of solidification cooling rate and (Mn,Cr) alloying elements in the modification of β-AlFeSi and hardness evolvements in near-eutectic Al-Si alloys. Journal of Alloys and Metallurgical Systems, v. 1, p. 100005, 2023.

8. DA SILVA-SANTOS, CARLOS HENRIQUE ; GOULART, PEDRO ROBERTO ; Bertelli, Felipe ; Garcia, Amauri ; Cheung, Noé . Nature inspired algorithms for the solution of inverse heat transfer problems applied to distinct unsteady heat flux orientations in cylindrical castings. JOURNAL OF INTELLIGENT MANUFACTURING, v. 34, p. 2407-2430, 2023.

9. KAKITANI, R.; CARRARA, A. P. ; MARIANI, F. E. ; VERÍSSIMO, N. C. ; CASTELETTI, L. C. ; Garcia, A. ; Cheung, N. . Tensile, wear, and corrosion behaviors of an in situ Al-Al3Ni metal matrix composite solidified under different cooling rates. JOURNAL OF MATERIALS SCIENCE, v. 58, p. 8796-8814, 2023.

10. OBARA, THOMAS J. ; MINEI, RAPHAEL O. ; KAKITANI, RAFAEL ; SPINELLI, JOSÉ E. ; Garcia, Amauri ; Cheung, Noé . Solidification microstructure and mechanical properties of an Al-11wt%Si alloy modified with Nb and Sb. JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS, v. 181, p. 111521, 2023.

11. SANTOS, L. S. ; MACEDO, E. N. ; RIBEIRO FILHO, P. R. C. F. ; CUNHA, A. ; CHEUNG, N . Belt Rotation in Pipe Conveyors: Failure Mode Analysis and Overlap Stability Assessment. Sustainability, v. 15, p. 11312, 2023.

12. VIDA, TALITA ; CRUZ, CLARISSA ; BARROS, ANDRÉ ; Cheung, Noé ; Brito, Crystopher ; Garcia, Amauri . Biodegradable Zn−1wt.%Mg(−0.5wt.%Mn) Alloys: Influence of Solidification Microstructure on Their Corrosion Behavior. Surfaces, v. 6, p. 268-280, 2023.

13. ELESBÃO, DENIS SILVA GRILLO ; KAKITANI, RAFAEL ; Cheung, Noé ; Garcia, Amauri ; DE BARCELLOS, VINICIUS KARLINSKI ; DA COSTA, ELEANI MARIA ; DOS SANTOS, CARLOS ALEXANDRE . Influence of Cu and Cr contents on the solidification path and microstructure formation of hypoeutectic as-cast Al-Cu-Cr alloys. JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, v. 148, p. 9403-9421, 2023.

14. CRUZ, C. ; SOARES, T. ; BARROS, A. S. ; GARCIA, A. ; CHEUNG, N . The Influence of Interfacial Thermal Conductance on the Tensile Strength of a Sn-Mg Solder Alloy. Metals, v. 13, p. 1813, 2023.

15. FARIA, JONAS ; DE PAULA, ANDREI ; SILVA, CÁSSIO ; KAKITANI, RAFAEL ; BARROS, ANDRÉ ; Garcia, Amauri ; Brito, Crystopher ; Cheung, Noé . Fe-Containing Al-Based Alloys: Relationship between Microstructural Evolution and Hardness in an Al-Ni-Fe Alloy. Metals, v. 13, p. 1980, 2023.

16. BARALDI, R. ; SILVA, D. ; GOUVEIA, G. L. ; Garcia, A. ; SPINELLI, J. E. . Al-Ce alloy high cooling rate cells: a combined experimental and modeling strategy. Letters On Materials, v. 13, p. 281-285, 2023.

2022

1. KAKITANI, R.; SILVA, CÁSSIO A.P. ; SILVA, BISMARCK L. ; GARCIA, AMAURI ; CHEUNG, NOÉ ; SPINELLI, JOSÉ E. . Local solidification thermal parameters affecting the eutectic extent in Sn-Cu and Sn-Bi solder alloys. SOLDERING & SURFACE MOUNT TECHNOLOGY, v. 34, p. 24-30, 2022.
   
   
2. MACHADO, PEDRO AUGUSTO BOTTLENDER ; DO VALE QUARESMA, JOSÉ MARIA ; Garcia, Amauri ; DOS SANTOS, CARLOS ALEXANDRE . Investigation on machinability in turning of as-cast and T6 heat-treated Al-(3, 7, 12%)Si-0.6%Mg alloys. Journal of Manufacturing Processes, v. 75, p. 514-526, 2022.

3. DE ALBUQUERQUE SOUSA, SARAH MARIA ; SALDANHA, FELIPE ESCHER ; DE GOUVEIA, GUILHERME LISBOA ; Garcia, Amauri ; Spinelli, José Eduardo . NbB refining capability: Effects of slow and rapid solidification on dendritic spacings and grain sizes of a 6201 alloy. MATERIALS LETTERS, v. 315, p. 131960, 2022.

4. OLIVEIRA, RICARDO ; CRUZ, CLARISSA ; BARROS, ANDRÉ ; Bertelli, Felipe ; Spinelli, José Eduardo ; Garcia, Amauri ; Cheung, Noé . Thermal conductance at Sn-0.5mass%Al solder alloy/substrate interface as a factor for tailoring cellular/dendritic growth. JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, v. 147, p. 4945-4958, 2022.

5. KAKITANI, R. ; KONNO, C. Y. N. ; GARCIA, A. ; CHEUNG, N. . The Effects of Solidification Cooling and Growth Rates on Microstructure and Hardness of Supersaturated Al-7%Si-x%Zn Alloys. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, v. 31, p. 1956-1970, 2022.

6. FERREIRA, I. L. ; Garcia, A. ; MOREIRA, A. L. S. . Closed-form solution for the inward unsteady-state solidification of cylinders and spheres: pure metals and eutectics. JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, v. 147, p. 9009-9024, 2022.

7. RODRIGUES, ADILSON V. ; KAKITANI, RAFAEL ; OLIVEIRA, RICARDO ; BARROS, ANDRÉ ; Brito, Crystopher ; Garcia, Amauri ; Cheung, Noé . Two-Phase Dendrite and Bimodal Structure in an Al-Cu-Ni Alloy: Their Roles in Hardness. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, v. 31, p. 3704-3715, 2022.

8. DE MOURA, DANUSA ARAÚJO ; DE GOUVEIA, GUILHERME LISBOA ; FIGUEIRA, GUSTAVO ; Garcia, Amauri ; GARGARELLA, PITER ; Spinelli, José Eduardo . Laser remelting of AlSi10Mg(-Ni) alloy surfaces: influence of Ni content and cooling rate on the microstructure. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, v. 120, p. 8117-8132, 2022.

9. SILVA, CÁSSIO ; BARROS, ANDRÉ ; VIDA, TALITA ; Garcia, Amauri ; Cheung, Noé ; REIS, DANIELI A. P. ; Brito, Crystopher . Assessing Microstructure Tensile Properties Relationships in Al-7Si-Mg Alloys via Multiple Regression. Metals, v. 12, p. 1040, 2022.

10. SEPTIMIO, RUDIMYLLA ; SILVA, CÁSSIO A. P. ; COSTA, THIAGO A. ; Garcia, Amauri ; Cheung, Noé . Hypereutectic Zn-Al Alloys: Microstructural Development under Unsteady-State Solidification Conditions, Eutectic Coupled Zone and Hardness. Metals, v. 12, p. 1076, 2022.

11. SILVA, BISMARCK LUIZ ; GOUVEIA, GUILHERME LISBOA ; Cheung, Noé ; Garcia, Amauri ; Spinelli, José Eduardo . Analysis of extensive wetting angle vs. cooling rate data in Bi-, Zn- and Sn-based solder alloys. MICROELECTRONICS RELIABILITY, v. 135, p. 114593, 2022.

12. SILVA, BISMARCK LUIZ ; MENDES, PEDRO HENRIQUE ; Garcia, Amauri ; Spinelli, José Eduardo . Effect of Aging on Dendritic Array, Ag3Sn Spacing, and Hardness of a Sn-2Ag-0.7Cu Solder Alloy. JOURNAL OF ELECTRONIC MATERIALS, v. 51, p. 4640-4648, 2022.

13. SILVA, C. ; BARROS, A. S. ; RODRIGUES, A. V. ; KAKITANI, R. ; SOARES, THIAGO ; GARCIA, A. ; CHEUNG, N . Microstructure and Tensile Strength of an Al‐Si‐Fe‐V Alloy: Vanadium and Solidification Thermal Parameters as Recycling Strategies. Sustainability, v. 14, p. 13859, 2022.

14. BARROS, ANDRÉ ; CRUZ, CLARISSA ; BOTELHO, TAMIRES ; SILVA, ADRINA ; CASTELETTI, LUIZ ; Garcia, Amauri ; Cheung, Noé . Dry Sliding Wear Features of an Al-20Sn-5Zn Alloy Affected by Microstructural Length Scales. LUBRICANTS, v. 10, p. 352, 2022.
15. GODOY LEME, MARIANE ALVES DE ; KAKITANI, RAFAEL ; TAKEDA, CINTIA MINORI ; SILVA, KENNEDY GABRIEL ; CHEUNG, NOÉ ; MIGUEL, MIRIAM GONÇALVES . Characterization of Mined Metals from a Brazilian Sanitary Landfill. Journal of Sustainable Metallurgy, v. 8, p. 1904-1914, 2022.

16. GOMES, G. M. ; DIB, M. H. M. ; CHEUNG, N. ; GOMES, C. M. . Potencial de aplicação da sílica do arroz (SCA) em matrizes magnesianas para produção de rebolos abrasivos. Materia-Rio de Janeiro, v. 27, p. e13199, 2022.

2021

1. SEPTIMIO, RUDIMYLLA ; CRUZ, CLARISSA ; XAVIER, MARCELLA ; LIMA, THIAGO ; Garcia, Amauri ; Spinelli, José Eduardo ; Cheung, Noé . Interface evaluation of a Bi-Zn eutectic solder alloy: Effects of different substrate materials on thermal contact conductance. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, v. 160, p. 106685, 2021.

2. SOARES, THIAGO ; CRUZ, CLARISSA ; XAVIER, MARCELLA ; REYES, RODRIGO V. ; Bertelli, Felipe ; Garcia, Amauri ; Spinelli, José E. ; Cheung, Noé . Interfacial heat transfer and microstructural analyses of a Bi- 5% Sb lead-free alloy solidified against Cu, Ni and low-C steel substrates. JOURNAL OF ALLOYS AND COMPOUNDS, v. 860, p. 158553, 2021.

3. CARRARA, A. P. ; KAKITANI, R. ; Garcia, A. ; CHEUNG, N. . Effect of cooling rate on microstructure and microhardness of hypereutectic Al-Ni alloy. Archives of Civil and Mechanical Engineering, v. 21, p. 14, 2021.

4. REYES, R. A. V. ; GARCIA, A. ; SPINELLI, J. E. . Evaluating Microstructure,Wear Resistance and Tensile Properties of Al-Bi(-Cu, -Zn) Alloys for Lightweight Sliding Bearings. Metals, v. 11, p. 153, 2021.

5. GOMES, LEONARDO F ; SILVA, BISMARCK L ; SILVA JR, P SERGIO ; Garcia, Amauri ; SPINELLI, JOSE EDUARDO . Ag-containing aluminum-silicon alloys as an alternative for as-cast components of electric vehicles. Materials Research Express, v. 8, p. 016527, 2021.

6. GOMES, C. M. ; CHEUNG, N. ; GOMES, G. M. ; SOUSA, A. K. ; PERUZZI, A. P. . Improvement of water resistance in magnesia cements with renewable source silica. CONSTRUCTION AND BUILDING MATERIALS, v. 272C, p. 121650, 2021.

7. GOUVEIA, GUILHERME L. ; GOMES, LEONARDO F. ; Cheung, Noé ; Garcia, Amauri ; Spinelli, José E. . Mechanical Properties, Microstructural Features, and Correlations with Solidification Rates of Al-Cu-Si Ultrafine Eutectic Alloys. ADVANCED ENGINEERING MATERIALS, v. 23, p. 2001177, 2021.

8. FERREIRA, I. L. ; Garcia, A. ; MOREIRA, A. L. S. . On the Transient Atomic/Heat Diffusion in Cylinders and Spheres with Phase Change: A Method to Derive Closed-Form Solutions. International Journal of Mathematics and Mathematical Sciences, v. 2021, p. 1-19, 2021.

9. DIAS, MARCELINO ; VERISSIMO, NATHÁLIA C. ; REGONE, NATAL N. ; Freitas, Emmanuelle S. ; Cheung, Noé ; Garcia, Amauri . Electrochemical corrosion behaviour of Sn-Sb solder alloys: the roles of alloy Sb content and type of intermetallic compound. CORROSION ENGINEERING SCIENCE AND TECHNOLOGY, v. 56, p. 11-21, 2021.

10. BARROS, ANDRÉ ; CRUZ, CLARISSA ; Garcia, Amauri ; Cheung, Noé . Corrosion Behavior of an Al-Sn-Zn Alloy: Effects of Solidification Microstructure Characteristics. Journal of Materials Research and Technology-JMR&T, v. 12, p. 257-263, 2021.

11. DE MEDEIROS, MÚCIO DANTAS ; SEPTÍMIO, RUDIMYLLA ; DA SILVA, CÁSSIO AUGUSTO PINTO ; Spinelli, José Eduardo ; Cheung, Noé ; Garcia, Amauri ; SILVA, BISMARCK LUIZ . Modifications on solidification thermal parameters, microstructure and hardness induced by Cu additions to a hypereutectic Zn 8Al alloy. MATERIALS CHARACTERIZATION, v. 174, p. 110936, 2021.

12. BECK FILHO, E. F. ; ANICETO, P. J. ; CHEUNG, N. ; SANTOS, C. H. S. ; BERTELLI, F. . Modelagem numérica da transferência de calor do processo de lingotamento contínuo de tarugo oco de cobre em uma planta industrial. TECNOLOGIA EM METALURGIA, MATERIAIS E MINERAÇÃO, v. 18, p. 2402, 2021.

13. KONNO, CAMILA ; CRUZ, CLARISSA ; COSTA, THIAGO ; BARROS, ANDRÉ ; Goulart, Pedro ; Garcia, Amauri ; Cheung, Noé . Solidification microstructure-dependent hydrogen generation behavior of Al-Sn and Al-Fe alloys in alkaline medium. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v. 46, p. 12654-12671, 2021.

14. ROSSO, EDUARDO ; Santos, Carlos A. ; Garcia, Amauri . Microstructure, Hardness, Tensile Strength, and Sliding Wear of Hypoeutectic Al-Si Cast Alloys with Small Cr Additions and Fe-Impurity Content. ADVANCED ENGINEERING MATERIALS, v. 23, p. 2001552, 2021.

15. VIDA, TALITA A. ; SILVA, CÁSSIO A.P. ; LIMA, THIAGO S. ; Cheung, Noé ; Brito, Crystopher ; Garcia, Amauri . Tailoring microstructure and microhardness of Zn−1wt.%Mg−(0.5wt.%Mn, 0.5wt.%Ca) alloys by solidification cooling rate. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, v. 31, p. 1031-1048, 2021.

16. PEREIRA, CLEITON LUIZ ; GOMES, LEONARDO FERNANDES ; Garcia, Amauri ; Spinelli, José Eduardo . Comparing the roles of Sb and Bi on microstructures and application properties of the Al-15% Si alloy. JOURNAL OF ALLOYS AND COMPOUNDS, v. 878, p. 160343, 2021.

17. LISBOA DE GOUVEIA, GUILHERME ; Garcia, Amauri ; EDUARDO SPINELLI, JOSÉ . Towards a morphological control of Mg2Si and superior tensile properties of high-Zn Mg-0.6Si (-Zn) alloys. MATERIALS LETTERS, v. 299, p. 130084, 2021.

18. SEPTIMIO, RUDIMYLLA ; CRUZ, CLARISSA ; Silva, Bismarck ; Garcia, Amauri ; Spinelli, José Eduardo ; Cheung, Noé . Microstructural and segregation effects affecting the corrosion behavior of a high-temperature Bi-Ag solder alloy in dilute chloride solution. JOURNAL OF APPLIED ELECTROCHEMISTRY, v. 51, p. 769-780, 2021.

19. MIRANDA, R. ; CRUZ, CLARISSA ; CHEUNG, N. ; CUNHA, A. . Fatigue Failure Analysis of a Speed Reduction Shaft. Metals, v. 11, p. 856, 2021.

20. KAKITANI, RAFAEL ; OLIVEIRA, RICARDO ; REYES, RODRIGO V. ; RODRIGUES, ADILSON V. ; Bertelli, Felipe ; Garcia, Amauri ; Spinelli, José E. ; Cheung, Noé . Metal/mold thermal conductance affecting ultrafine scale microstructures in aluminum eutectic alloys. CASE STUDIES IN THERMAL ENGINEERING, v. 26, p. 101144, 2021.

21. GANDOLFI, MARESSA ; XAVIER, MARCELLA GAUTÊ CAVALCANTE ; GOMES, LEONARDO FERNANDES ; REYES, RODRIGO ANDRÉ VALENZUELA ; Garcia, Amauri ; Spinelli, José Eduardo . Relationship between Microstructure Evolution and Tensile Properties of AlSi10Mg Alloys with Varying Mg Content and Solidification Cooling Rates. Metals, v. 11, p. 1019, 2021.

22. SEPTIMIO, RUDIMYLLA ; ARENAS, MARIA A. ; CONDE, ANA ; GARCIA, IÑAKI ; Garcia, Amauri ; Cheung, Noé ; DE DAMBORENEA, JUAN . Effect of Bi content on microstructure and corrosion behaviour of Zn-8Al-(Bi) alloys. CORROSION ENGINEERING SCIENCE AND TECHNOLOGY, v. 56, p. 461-472, 2021.

23. FERREIRA SCHON, ALINE ; APOENA CASTRO, NICOLAU ; DOS SANTOS BARROS, ANDRÉ ; EDUARDO SPINELLI, JOSÉ ; Garcia, Amauri ; Cheung, Noé ; LUIZ SILVA, BISMARCK . Multiple linear regression approach to predict tensile properties of Sn-Ag-Cu (SAC) alloys. MATERIALS LETTERS, v. 304, p. 130587, 2021.

24. DE GOUVEIA, GUILHERME LISBOA ; Garcia, Amauri ; Spinelli, José Eduardo . Tailoring microstructure and tensile properties of Mg-Si alloys varying solidification cooling rate and Si content. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v. 825, p. 141905, 2021.

25. XAVIER, MARCELLA G. C. ; FREITAS, BRENDA J. M. ; GOUVEIA, GUILHERME L. ; Garcia, Amauri ; Spinelli, José E. . The Roles of Ni and Co in Dendritic Growth and Tensile Properties of Fe-Containing Al-Si-Cu-Zn Scraps under Slow and Fast Solidification Cooling. ADVANCED ENGINEERING MATERIALS, v. 23, p. 2100822, 2021.

26. GOMES, LEONARDO FERNANDES ; KUGELMEIER, CRISTIE LUIS ; Garcia, Amauri ; DELLA ROVERE, CARLOS ALBERTO ; Spinelli, José Eduardo . Influences of alloying elements and dendritic spacing on the corrosion behavior of Al-Si-Ag alloys. Journal of Materials Research and Technology-JMR&T, v. 15, p. 5880-5893, 2021.

27. RODRIGUES, ADILSON V. ; LIMA, T. S. ; VIDA, TALITA ALMEIDA ; BRITO, C. ; Amauri Garcia ; CHEUNG, N. . Microstructure features and mechanical/electrochemical behavior of directionally solidified Al−6wt.%Cu−5wt.%Ni alloy. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, v. 31, p. 1529-1549, 2021.

2020

1. SILVA-SANTOS, C.H. ; MORAIS, J.V.F. ; BERTELLI, F. ; Garcia, A. ; CHEUNG, N. . Purification of naphthalene by zone refining: mathematical modelling and optimization by swarm intelligence-based techniques. SEPARATION AND PURIFICATION TECHNOLOGY, v. 234, p. 116089, 2020.

2. SOARES, THIAGO ; CRUZ, CLARISSA ; Silva, Bismarck ; Brito, Crystopher ; Garcia, Amauri ; Spinelli, José Eduardo ; Cheung, Noé . Interplay of Wettability, Interfacial Reaction and Interfacial Thermal Conductance in Sn-0.7Cu Solder Alloy/Substrate Couples. JOURNAL OF ELECTRONIC MATERIALS, v. 49, p. 173-187, 2020.

3. ACHE, CAROLINA ; LOPES, MAIQUEL ; REIS, BERNARDO ; Garcia, Amauri ; SANTOS, CARLOS DOS . Dendritic Spacing/Columnar Grain Diameter of Al-2Mg-Zn Alloys Affecting Hardness, Tensile Properties, and Dry Sliding Wear in the As-Cast/Heat-Treated Conditions. ADVANCED ENGINEERING MATERIALS, v. 22, p. 1901145, 2020.

4. SEPTIMIO, RUDIMYLLA S. ; COSTA, THIAGO A. ; SILVA, CÁSSIO A. P. ; VIDA, TALITA A. ; DE DAMBORENEA, JUAN ; Garcia, Amauri ; Cheung, Noé . Correlation between unsteady-state solidification thermal parameters and microstructural growth of Zn-8 mass% Al and Zn-8 mass% Al-XBi tribological alloys. JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, v. 139, p. 1741-1761, 2020.

5. RAMOS, LIDIANE SILVA ; REYES, RODRIGO VALENZUELA ; GOMES, LEONARDO FERNANDES ; Garcia, Amauri ; Spinelli, José Eduardo ; SILVA, BISMARCK LUIZ . The role of eutectic colonies in the tensile properties of a Sn-Zn eutectic solder alloy. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v. 776, p. 138959, 2020.

6. DONADONI, BRUNO ; DE GOUVEIA, GUILHERME LISBOA ; Garcia, Amauri ; Spinelli, José Eduardo . A comparison of experimental time-secondary dendritic spacing and coarsening models for Al-Si-Cu alloys. Journal of Manufacturing Processes, v. 54, p. 14-18, 2020.

7. XAVIER, MARCELLA G. C. ; SOUZA, THAISA M. G. ; Cheung, Noé ; Garcia, Amauri ; Spinelli, José E. . Effects of cobalt and solidification cooling rate on intermetallic phases and tensile properties of a -Cu, -Zn, -Fe containing Al-Si alloy. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, v. 107, p. 717-730, 2020.

8. SILVA, C. A. P. ; SOARES, T. ; CHEUNG, N ; GARCIA, A. ; REIS, D. A. P. ; Brito, Crystopher . Dendritic Spacing and Macrosegregation Affecting Microhardness of an Al-Si-Mg Alloy Solidified Under Unsteady State Conditions. MATERIALS RESEARCH, v. 22, p. e20190390, 2020.

9. SOARES, T. ; CRUZ, CLARISSA ; BARROS, A. S. ; GARCIA, A. ; CHEUNG, N . Microstructure Growth Morphologies, Macrosegregation and Microhardness in Bi-Sb Thermal Interface Alloys. Advanced Engineering Materials, v. 22, p. 1901592, 2020.

10. CRUZ, CLARISSA ; LIMA, THIAGO ; SOARES, MARCO ; FREITAS, EMMANUELLE ; FUJIWARA, ERIC ; Garcia, Amauri ; Cheung, Noé . Effect of Microstructure Features on the Corrosion Behavior of the Sn-2.1 wt%Mg Solder Alloy. Electronic Materials Letters, v. 16, p. 276-292, 2020.

11. CRUZ, CLARISSA ; LIMA, THIAGO ; KAKITANI, RAFAEL ; BARROS, ANDRÉ ; Garcia, Amauri ; Cheung, Noé . Plate-like growth in a eutectic Bi-Ni alloy: effects of morphological microstructure evolution and Bi3Ni intermetallic phase on tensile properties. Journal of Materials Research and Technology-JMR&T, v. 9, p. 4940-4950, 2020.

12. DIAS, MARCELINO ; OLIVEIRA, RICARDO ; KAKITANI, RAFAEL ; Cheung, Noé ; HENEIN, HANI ; Spinelli, José Eduardo ; Garcia, Amauri . Effects of solidification thermal parameters and Bi doping on silicon size, morphology and mechanical properties of Al-15wt.% Si-3.2wt.% Bi and Al-18wt.% Si-3.2wt.% Bi alloys. Journal of Materials Research and Technology-JMR&T, v. 9, p. 3460-3470, 2020.

13. RIBEIRO, THIAGO M. ; CATELLAN, EDUARDO ; Garcia, Amauri ; DOS SANTOS, CARLOS A. . The effects of Cr addition on microstructure, hardness and tensile properties of as-cast Al-3.8wt.%Cu-(Cr) alloys. Journal of Materials Research and Technology-JMR&T, v. 9, p. 6620-6631, 2020.

14. FERREIRA, I. L. ; Garcia, A. . The application of numerical and analytical approaches for the determination of thermophysical properties of Al-Si-Cu-Mg alloys. CONTINUUM MECHANICS AND THERMODYNAMICS, v. 32, p. 1231-1244, 2020.

15. PAIXÃO, JEVERTON LAUREANO ; GOMES, LEONARDO FERNANDES ; REYES, RODRIGO VALENZUELA ; Garcia, Amauri ; Spinelli, José Eduardo ; SILVA, BISMARCK LUIZ . Microstructure characterization and tensile properties of directionally solidified Sn-52-wt% Bi-1wt% Sb and Sn-52wt% Bi-2wt% Sb alloys. MATERIALS CHARACTERIZATION, v. 166, p. 110445, 2020.

16. REYES, RODRIGO V. ; Casteletti, Luiz C. ; Garcia, Amauri ; Spinelli, José E. . Characterization of microstructure and wear resistance of a monotectic Al-Bi-Zn alloy. JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS, v. 147, p. 109631, 2020.

17. BARROS, ANDRÉ ; CRUZ, CLARISSA ; Silva, Adrina P. ; Cheung, Noé ; Garcia, Amauri ; ROCHA, OTÁVIO ; MOREIRA, ANTONIO . Length scale of solidification microstructure tailoring corrosion resistance and microhardness in T6 heat treatment of an Al-Cu-Mg alloy. CORROSION ENGINEERING SCIENCE AND TECHNOLOGY, v. 55, p. 471-479, 2020.

18. KAKITANI, RAFAEL ; Garcia, Amauri ; Cheung, Noé . Morphology of Intermetallics Tailoring Tensile Properties and Quality Index of a Eutectic Al-Si-Ni Alloy. ADVANCED ENGINEERING MATERIALS, v. 22, p. 2000503, 2020.

19. OLIVEIRA, R. ; KAKITANI, R. ; CANGERANA, K. ; GARCIA, A. ; CHEUNG, N. . Microstructural Refinement and Improvement of Microhardness of a Hypoeutectic Al-Fe Alloy Treated by Laser Surface Remelting. Materials Proceedings, v. 2, p. 16, 2020.

20. OLIVEIRA, RICARDO ; COSTA, THIAGO A. ; DIAS, MARCELINO ; KONNO, CAMILA ; Cheung, Noé ; Garcia, Amauri . Transition from high cooling rate cells to dendrites in directionally solidified Al-Sn-(Pb) alloys. Materials Today Communications, v. 25, p. 101490, 2020.

21. BEZERRA, BRUNA NORAT ; FERREIRA, DIEGO JOSÉ SACRAMENTO ; FERREIRA, ALEXANDRE FURTADO ; Garcia, Amauri ; Ferreira, Ivaldo Leão . Application of a Phase Field Model to Multicomponent Al-Cu-Si alloys. MATERIALS RESEARCH, v. 23, p. e20200198, 2020.

22. SILVA, CÁSSIO A.P. ; KAKITANI, RAFAEL ; Canté, Manuel V. ; Brito, Crystopher ; Garcia, Amauri ; Spinelli, José E. ; Cheung, Noé . Microstructure, phase morphology, eutectic coupled zone and hardness of Al Co alloys. MATERIALS CHARACTERIZATION, v. 169, p. 110617, 2020.

23. DE ALFAIA, MAURO ÂNGELO OLIVEIRA ; OLIVEIRA, RICARDO ; LIMA, THIAGO SOARES ; MARIANI, FÁBIO EDSON ; CASTELETTI, LUIZ CARLOS ; Cheung, Noé ; Garcia, Amauri . Effects of cooling rate and microstructure scale on wear resistance of unidirectionally solidified Al-3.2wt.%Bi-(1; 3) wt.%Pb alloys. Materials Today Communications, v. 25, p. 101659, 2020.

24. SEPTIMIO, RUDIMYLLA S. ; ARENAS, MARIA A. ; CONDE, ANA ; Garcia, Amauri ; Cheung, Noé ; DAMBORENEA, JUAN DE . Galvanic corrosion analysis of a Bi-Zn solder alloy coupled to Ni and Cu substrates. CORROSION ENGINEERING SCIENCE AND TECHNOLOGY, v. 55, p. 729-738, 2020.

25. GOMES, LEONARDO FERNANDES ; DA SILVA, PAULO SÉRGIO ; Garcia, Amauri ; Spinelli, José Eduardo . Effects of Silver Content and Cooling Rate on Electrical Conductivity and Tensile Properties of Al-Si(-Ag) Alloys. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, v. 29, p. 6849-6860, 2020.
    
    

2019

1. OGATA, CÍNTHIA TOSHIMI ; REYES, RODRIGO VALENZUELA ; Garcia, Amauri ; Spinelli, José Eduardo . Length Scale of the Dendritic Array Tailoring Strength of a 5052 Aluminum Alloy. Materials Research-Ibero-american Journal of Materials, v. 22, p. e20180561, 2019.

2. KAKITANI, RAFAEL ; REYES, RODRIGO V. ; Garcia, Amauri ; Cheung, Noé ; Spinelli, José E. . Effects of Melt Superheating on the Microstructure and Tensile Properties of a Ternary Al-15 Wt Pct Si-1.5 Wt Pct Mg Alloy. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, v. 50, p. 1308-1322, 2019.

3. GOUVEIA, G. L. ; KAKITANI, RAFAEL ; GOMES, L. F. ; AFONSO, C. R. M. ; CHEUNG, N ; Spinelli, J.E. . Slow and rapid cooling of Al-Cu-Si ultrafine eutectic composites: Interplay of cooling rate and microstructure in mechanical properties. JOURNAL OF MATERIALS RESEARCH, v. 34, p. 1381-1394, 2019.

4. REYES, RODRIGO V. ; PINOTTI, VITOR E. ; AFONSO, CONRADO R. M. ; Casteletti, Luiz C. ; Garcia, Amauri ; Spinelli, José E. . Processing, As-Cast Microstructure and Wear Characteristics of a Monotectic Al-Bi-Cu Alloy. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, v. 28, p. 1201-1212, 2019.

5. SOARES, THIAGO ; GOUVEIA, G. L. ; SEPTIMIO, R. S. ; CRUZ, C. ; SILVA, B. L. ; Brito, Crystopher ; SPINELLI, J. E. ; CHEUNG, N . Sn-0.5Cu(-x)Al solder alloys: microstructure-related aspects and tensile properties responses. Metals, v. 9, p. 1-19, 2019.

6. VIDA, TALITA A. ; Brito, Crystopher ; SOARES, THIAGO ; Spinelli, José E. ; Cheung, Noé ; Garcia, Amauri . Near-eutectic Zn-Mg alloys: Interrelations of solidification thermal parameters, microstructure length scale and tensile/corrosion properties. CURRENT APPLIED PHYSICS, v. 19, p. 582-598, 2019.

7. SEPTIMIO, RUDIMYLLA S. ; ARENAS, MARIA A. ; CONDE, ANA ; Garcia, Amauri ; Cheung, Noé ; DAMBORENEA, JUAN DE . Correlation between microstructure and corrosion behaviour of Bi-Zn solder alloys. CORROSION ENGINEERING SCIENCE AND TECHNOLOGY, v. 54, p. 362-368, 2019.

8. SILVA, B. L. ; GARCIA, A. ; SPINELLI, J. E. . Wetting behavior of Sn-Ag-Cu and Sn-Bi-X alloys: Insights into factors affecting cooling rate. Journal of Materials Research and Technology-JMR&T, v. 8(1), p. 1581-1586, 2019.

9. BAPTISTA, L. A. S. ; PARADELA, K. G. ; FERREIRA, I. L. ; GARCIA, A. ; FERREIRA, A. F. . Experimental study of the evolution of tertiary dendritic arms and microsegregation in directionally solidified Al-Si-Cu alloys. Journal of Materials Research and Technology-JMR&T, v. 8(1), p. 1515-1521, 2019.

10. BARROS, ANDRÉ ; CRUZ, CLARISSA ; Silva, Adrina P. ; Cheung, Noé ; Garcia, Amauri ; ROCHA, OTÁVIO ; MOREIRA, ANTONIO . Horizontally Solidified Al-3 wt%Cu-(0.5 wt%Mg) Alloys: Tailoring Thermal Parameters, Microstructure, Microhardness, and Corrosion Behavior. Acta Metallurgica Sinica-English Letters, v. 32, p. 695-709, 2019.

11. KAKITANI, RAFAEL ; CRUZ, CLARISSA B. ; LIMA, THIAGO S. ; Brito, Crystopher ; Garcia, Amauri ; Cheung, Noé . Transient directional solidification of a eutectic Al-Si-Ni alloy: macrostructure, microstructure, dendritic growth and hardness. Materialia, v. 7, p. 100358, 2019.

12. BRITO, C. ; NGUYEN-THI, H. ; MANGELINCK-NOËL, N. ; CHEUNG, N. ; Spinelli, J.E. ; GARCIA, A . Cellular-to-Dendritic and Dendritic-to-Cellular Morphological Transitions in a Ternary Al-Mg-Si Alloy. IOP Conference Series: Materials Science and Engineering, v. 529, p. 012018, 2019.

13. KAKITANI, RAFAEL ; DE GOUVEIA, GUILHERME LISBOA ; Garcia, Amauri ; Cheung, Noé ; Spinelli, José E. . Thermal analysis during solidification of an Al-Cu eutectic alloy: interrelation of thermal parameters, microstructure and hardness. JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, v. 137, p. 983-996, 2019.

14. DA SILVA, VÍTOR COVRE EVANGELISTA ; DE GOUVEIA, GUILHERME LISBOA ; REYES, RODRIGO ANDRÉ VALENZUELA ; Garcia, Amauri ; Spinelli, José Eduardo . Sn-Bi(-Ga) TIM Alloys: Microstructure, Tensile Properties, Wettability and Interfacial Reactions. JOURNAL OF ELECTRONIC MATERIALS, v. 48, p. 4773-4788, 2019.

15. FERREIRA, I. L. ; DE CASTRO, J. A. ; Garcia, A. . On the prediction of temperature-dependent viscosity of multicomponent liquid alloys. CONTINUUM MECHANICS AND THERMODYNAMICS, v. 31, p. 1369-1385, 2019.

16. LIMA, THIAGO SOARES ; SILVA, BISMARCK LUIZ ; Garcia, Amauri ; Cheung, Noé ; Spinelli, José Eduardo . Dendritic and eutectic growth of Sn-0.5 wt.%Cu solders with low alloying Al levels. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, v. 233, p. 1733-1737, 2019.

17. SCHON, ALINE FERREIRA ; REYES, RODRIGO VALENZUELA ; Spinelli, José Eduardo ; Garcia, Amauri ; SILVA, BISMARCK LUIZ . Assessing microstructure and mechanical behavior changes in a Sn-Sb solder alloy induced by cooling rate. JOURNAL OF ALLOYS AND COMPOUNDS, v. 809, p. 151780, 2019.

18. VIDA, TALITA ALMEIDA ; SOARES, THIAGO ; SEPTIMIO, RUDIMYLLA SILVA ; BRITO, CRYSTOPHER CARDOSO ; Cheung, Noé ; Garcia, Amauri . Effects of Macrosegregation and Microstructure on the Corrosion Resistance and Hardness of a Directionally Solidified Zn-5.0wt.%Mg Alloy. Materials Research-Ibero-american Journal of Materials, v. 22, p. e20190009, 2019.

19. FERREIRA, I.L. ; DE CASTRO, J.A. ; Garcia, A. . Determination of heat capacity of pure metals, compounds and alloys by analytical and numerical methods. THERMOCHIMICA ACTA, v. 682, p. 178418, 2019.

20. COSTA, THIAGO A. ; DIAS, MARCELINO ; SILVA, CASSIO ; FREITAS, EMMANUELLE ; Silva, Adrina P. ; Cheung, Noé ; Garcia, Amauri . Measurement and interrelation of length scale of dendritic microstructures, tensile properties, and machinability of Al-9 wt% Si-(1 wt% Bi) alloys. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, v. 105, p. 1391-1410, 2019.

21. CURTULO, JOANISA P. ; DIAS, MARCELINO ; Bertelli, Felipe ; Silva, Bismarck L. ; Spinelli, José E. ; Garcia, Amauri ; Cheung, Noé . The application of an analytical model to solve an inverse heat conduction problem: Transient solidification of a Sn-Sb peritectic solder alloy on distinct substrates. Journal of Manufacturing Processes, v. 48, p. 164-173, 2019.

22. CRUZ, CLARISSA B. ; LIMA, THIAGO SOARES ; COSTA, THIAGO ANTONIO ; Brito, Crystopher ; Garcia, Amauri ; Cheung, Noé . Sn-Mg lead-free solder alloy: effect of solidification thermal parameters on microstructural features and microhardness. Materials Research Express, v. 6, p. 126562, 2019.

23. OLIVEIRA, RICARDO ; KAKITANI, RAFAEL ; RAMOS, LUCAS R. ; GONÇALVES, DANILO L. ; Garcia, Amauri ; Cheung, Noé . The Roles of Mn and Ni Additions to Fe-Contaminated Al in Neutralizing Fe and Stabilizing the Cellular α-Al Microstructure. Journal of Sustainable Metallurgy, v. 5, p. 561-580, 2019.

24. DE OLIVEIRA, ELIZABETH MENDES ; DO CARMO PARESQUE, MARA CAROLINE ; Ferreira, Ivaldo Leão ; Garcia, Amauri ; DE CASTRO, JOSE ADILSON . Modeling the Transport of Hazardous Colloidal Suspensions of Nanoparticles Within Soil of Landfill Layers Considering Multicomponent Interactions. Journal of Sustainable Metallurgy, v. 5, p. 581-593, 2019.

25. GOMES, LEONARDO FERNANDES ; DA SILVA, PAULO SÉRGIO ; Garcia, Amauri ; Spinelli, José Eduardo . Effects of Silver Content and Cooling Rate on Electrical Conductivity and Tensile Properties of Al-Si(-Ag) Alloys. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, v. 29, p. 6849-6860, 2020.

2018

1. VERISSIMO, NATHÁLIA C. ; Brito, Crystopher ; AFONSO, CONRADO R. ; Spinelli, José E. ; Cheung, Noé ; Garcia, Amauri . Microstructure characterization of a directionally solidified Mg-12wt.%Zn alloy: Equiaxed dendrites, eutectic mixture and type/ morphology of intermetallics. MATERIALS CHEMISTRY AND PHYSICS, v. 204, p. 105-131, 2018.

2. KAKITANI, RAFAEL ; REYES, RODRIGO V. ; Garcia, Amauri ; Spinelli, José E. ; Cheung, Noé . Relationship between spacing of eutectic colonies and tensile properties of transient directionally solidified Al-Ni eutectic alloy. JOURNAL OF ALLOYS AND COMPOUNDS, v. 733, p. 59-68, 2018.

3. SANTOS, WASHINGTON L.R. ; CRUZ, CLARISSA B. ; Spinelli, José E. ; Cheung, Noé ; Garcia, Amauri . Tailoring microstructure, tensile properties and fracture process via transient directional solidification of Zn-Sn alloys. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v. 712, p. 127-132, 2018.

4. DIAS, MARCELINO ; COSTA, THIAGO A. ; Silva, Bismarck L. ; Spinelli, José E. ; Cheung, Noé ; Garcia, Amauri . A comparative analysis of microstructural features, tensile properties and wettability of hypoperitectic and peritectic Sn-Sb solder alloys. MICROELECTRONICS RELIABILITY, v. 81, p. 150-158, 2018.

5. DIAS, MARCELINO ; COSTA, THIAGO A. ; SOARES, THIAGO ; Silva, Bismarck L. ; Cheung, Noé ; Spinelli, José E. ; Garcia, Amauri . Tailoring Morphology and Size of Microstructure and Tensile Properties of Sn-5.5 wt.%Sb-1 wt.%(Cu,Ag) Solder Alloys. JOURNAL OF ELECTRONIC MATERIALS, v. 47, p. 1647-1657, 2018.

6. FERREIRA, D. J. S. ; BEZERRA, B. N. ; COLLYER, M. N. ; Garcia, A. ; FERREIRA, I. L. . The use of computational thermodynamics for the determination of surface tension and Gibbs-Thomson coefficient of multicomponent alloys. CONTINUUM MECHANICS AND THERMODYNAMICS, v. 30, p. 1-10, 2018.

7. SILVA-SANTOS, C.H. ; Goulart, P.R. ; BERTELLI, F. ; Garcia, A. ; CHEUNG, N. . An artificial immune system algorithm applied to the solution of an inverse problem in unsteady inward solidification. ADVANCES IN ENGINEERING SOFTWARE, v. 121, p. 178-187, 2018.

8. CRUZ, CLARISSA BARROS DA ; KAKITANI, RAFAEL ; XAVIERB, MARCELLA GAUTÊ CAVALCANTE ; SILVA, BISMARCK LUIZ ; Garcia, Amauri ; Cheung, Noé ; Spinelli, José Eduardo . Transient Unidirectional Solidification, Microstructure and Intermetallics in Sn-Ni Alloys. MATERIALS RESEARCH, v. 21 sup, p. e20171099, 2018.

9. REIS, BERNARDO P. ; LOPES, MAIQUEL M. ; Garcia, Amauri ; DOS SANTOS, CARLOS A. . The correlation of microstructure features, dry sliding wear behavior, hardness and tensile properties of Al-2wt%Mg-Zn alloys. JOURNAL OF ALLOYS AND COMPOUNDS, v. 764, p. 267-278, 2018.

10. LIMA, THIAGO SOARES ; SILVA, BISMARCK LUIZ ; Garcia, Amauri ; Cheung, Noé ; Spinelli, José Eduardo . Dendritic and eutectic growth of Sn-0.5-wt.%Cu solders with low alloying Al levels. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, v. -, p. 146442071878431, 2018.

11. RODRIGUES, ADILSON V. ; LIMA, THIAGO S. ; VIDA, TALITA A. ; Brito, Crystopher ; Garcia, Amauri ; Cheung, Noé . Microstructure and Tensile/Corrosion Properties Relationships of Directionally Solidified Al-Cu-Ni Alloys. METALS AND MATERIALS INTERNATIONAL, v. 24, p. 1058-1076, 2018.

12. XAVIER, MARCELLA G. C. ; Silva, Bismarck L. ; Garcia, Amauri ; Spinelli, José E. . High Cooling Rate, Regular and Plate Like Cells in Sn-Ni Solder Alloys. ADVANCED ENGINEERING MATERIALS, v. 20, p. 1701179, 2018.

13. Canté, Manuel V. ; LIMA, THIAGO S. ; Brito, Crystopher ; Garcia, Amauri ; Cheung, Noé ; Spinelli, José E. . An Alternative to the Recycling of Fe-Contaminated Al. Journal of Sustainable Metallurgy, v. 4, p. 412-426, 2018.

14. Rocha, O.L. ; COSTA, T.A. ; DIAS, M. ; Garcia, A. . Cellular/dendritic transition, dendritic growth and microhardness in directionally solidified monophasic Sn-2%Sb alloy. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, v. 28, p. 1679-1686, 2018.

15. Ferreira, Ivaldo L. ; MOREIRA, ANTONIO L.S. ; AVIZ, JULIO A.S. ; COSTA, THIAGO A. ; ROCHA, OTÁVIO L. ; BARROS, ANDRÉ S. ; Garcia, Amauri . On an expression for the growth of secondary dendrite arm spacing during non-equilibrium solidification of multicomponent alloys: Validation against ternary aluminum-based alloys. Journal of Manufacturing Processes, v. 35, p. 634-650, 2018.

16. DONADONI, B. M. C. ; GOMES, L. F. ; Garcia, A. ; Spinelli, J.E. . Tailoring of microstructures and tensile properties in solidification of Al-11Si(-xCu) brazing alloys. Metals, v. 8, p. 1-23, 2018.

2017

1. SILVA, BISMARCK LUIZ ; Garcia, Amauri ; Spinelli, José Eduardo . Complex eutectic growth and Bi precipitation in ternary Sn-Bi-Cu and Sn-Bi-Ag alloys. Journal of Alloys and Compounds, v. 691, p. 600-605, 2017.
    
2. Bertelli, Felipe ; Freitas, Emmanuelle S. ; Cheung, Noé ; ARENAS, MARIA A. ; CONDE, ANA ; DE DAMBORENEA, JUAN ; Garcia, Amauri . Microstructure, tensile properties and wear resistance correlations on directionally solidified Al-Sn-(Cu; Si) alloys. Journal of Alloys and Compounds, v. 695, p. 3621-3631, 2017.
    
3. REYES, RODRIGO V. ; BELLO, THOMAS S. ; KAKITANI, RAFAEL ; COSTA, THIAGO A. ; Garcia, Amauri ; Cheung, Noé ; Spinelli, José E. . Tensile properties and related microstructural aspects of hypereutectic Al-Si alloys directionally solidified under different melt superheats and transient heat flow conditions. Materials Science & Engineering. A, Structural Materials: Properties, Microstructure and Processing, v. 685, p. 235-243, 2017.
    
4. SILVA, BISMARCK LUIZ ; DA SILVA, VÍTOR COVRE EVANGELISTA ; Garcia, Amauri ; Spinelli, José Eduardo . Effects of Solidification Thermal Parameters on Microstructure and Mechanical Properties of Sn-Bi Solder Alloys. Journal of Electronic Materials, v. 46, p. 1754-1769, 2017.
    
5. GOMES, LEONARDO F. ; Silva, Bismarck L. ; Garcia, Amauri ; Spinelli, José E. . Dendritic Growth, Solidification Thermal Parameters, and Mg Content Affecting the Tensile Properties of Al-Mg-1.5 Wt Pct Fe Alloys. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, v. 48, p. 1841-1855, 2017.
    
6. SILVA, BISMARCK LUIZ ; REYES, RODRIGO VALENZUELA ; Garcia, Amauri ; Spinelli, José Eduardo . Dendritic Growth, Eutectic Features and Their Effects on Hardness of a Ternary Sn-Zn-Cu Solder Alloy. Acta Metallurgica Sinica-English Letters, v. 30, p. 528-540, 2017.
    
7. FERREIRA, ALEXANDRE FURTADO ; PARADELA, KÉSSIA GOMES ; FELIPE JUNIOR, PAULO ; ALCÂNTARA JÚNIOR, ZILMAR ; Garcia, Amauri . Phase-Field Simulation of Microsegregation and Dendritic Growth During Solidification of Hypoeutectic Al-Cu alloys. Materials Research-Ibero-american Journal of Materials, v. 20, p. 423-429, 2017.
    
8. VIDA, TALITA A. ; Freitas, Emmanuelle S. ; Cheung, Noé ; Amauri Garcia ; Osório, Wislei R. . Electrochemical Corrosion Behavior of as-cast Zn-rich Zn-Mg Alloys in a 0.06M NaCl Solution. International Journal of Electrochemical Science, v. 12, p. 5264-5283, 2017.
    
9. VIDA, TALITA A. ; CONDE, ANA ; Freitas, Emmanuelle S. ; ARENAS, MARIA A. ; Cheung, Noé ; Brito, Crystopher ; DE DAMBORENEA, JUAN ; Garcia, Amauri . Directionally solidified dilute Zn-Mg alloys: Correlation between microstructure and corrosion properties. JOURNAL OF ALLOYS AND COMPOUNDS, v. 723, p. 536-547, 2017.
    
10. VERISSIMO, NATHALIA C. ; Freitas, Emmanuelle S. ; Cheung, Noé ; Garcia, Amauri ; Osório, Wislei R. . The effects of Zn segregation and microstructure length scale on the corrosion behavior of a directionally solidified Mg-25 wt.%Zn alloy. JOURNAL OF ALLOYS AND COMPOUNDS, v. 723, p. 649-660, 2017.
     
11. BRITO, C. ; BERTELLI, F. ; CASTANHO, M.A.P. ; Goulart, P.R. ; CHEUNG, N. ; Spinelli, J.E. ; Garcia, A. . Upward and downward unsteady-state directional solidification of a hypoeutectic Al-3wt.%Mg alloy. CIÊNCIA E TECNOLOGIA DOS MATERIAIS, v. 29, p. e65-e70, 2017.
     
12. XAVIER, MARCELLA G.C. ; CRUZ, CLARISSA B. ; KAKITANI, RAFAEL ; Silva, Bismarck L. ; Garcia, Amauri ; CHEUNG, NOÉ ; SPINELLI, JOSÉ E. . Directional solidification of a Sn-0.2Ni solder alloy in water-cooled copper and steel molds: Related effects on the matrix micromorphology, nature of intermetallics and tensile properties. JOURNAL OF ALLOYS AND COMPOUNDS, v. 723, p. 1039-1052, 2017.
     
13. SEPTIMIO, RUDIMYLLA S. ; COSTA, THIAGO A. ; VIDA, TALITA A. ; Garcia, Amauri ; Cheung, Noé . Interrelationship of thermal parameters, microstructure and microhardness of directionally solidified Bi-Zn solder alloys. MICROELECTRONICS RELIABILITY, v. 78, p. 100-110, 2017.
     
14. Silva, Bismarck L. ; XAVIER, MARCELLA G.C. ; Garcia, Amauri ; Spinelli, José E. . Cu and Ag additions affecting the solidification microstructure and tensile properties of Sn-Bi lead-free solder alloys. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v. 705, p. 325-334, 2017.

2016

1. VERISSIMO, NATHALIA C. ; Brito, Crystopher ; SANTOS, WASHINGTON L.R. ; Cheung, Noé ; Spinelli, José E. ; Garcia, Amauri . Interconnection of Zn content, macrosegregation, dendritic growth, nature of intermetallics and hardness in directionally solidified Mg-Zn alloys. Journal of Alloys and Compounds, v. 662, p. 1-10, 2016.
    
2. Bertelli, Felipe; FARIA, JONAS D. ; Goulart, Pedro R. ; Brito, Crystopher ; Cheung, Noé ; Garcia, Amauri . Numerical and experimental modelling of two-dimensional unsteady heat transfer during inward solidification of square billets. Applied Thermal Engineering, v. 96, p. 454-462, 2016.
    
3. SILVA, BISMARCK LUIZ; Bertelli, Felipe ; Canté, Manuel V. ; Spinelli, José E. ; Cheung, Noé ; Garcia, Amauri . Solder/substrate interfacial thermal conductance and wetting angles of Bi-Ag solder alloys. Journal of Materials Science. Materials in Electronics, v. 27, p. 1994-2003, 2016.
    
4. Silva, Bismarck L. ; Garcia, Amauri ; Spinelli, José E. . Cooling thermal parameters and microstructure features of directionally solidified ternary Sn-Bi-(Cu,Ag) solder alloys. Materials Characterization, v. 114, p. 30-42, 2016.
    
5. Bertelli, Felipe ; Cheung, Noé ; Ferreira, Ivaldo L. ; Garcia, Amauri . Evaluation of thermophysical properties of Al-Sn-Si alloys based on computational thermodynamics and validation by numerical and experimental simulation of solidification. Journal of Chemical Thermodynamics, v. 98, p. 9-20, 2016.
    
6. Brito, Crystopher ; VIDA, TALITA ; FREITAS, EMMANUELLE ; Cheung, Noé ; Spinelli, José Eduardo ; Garcia, Amauri . Cellular/dendritic arrays and intermetallic phases affecting corrosion and mechanical resistances of an Al-Mg-Si alloy. Journal of Alloys and Compounds, v. 673, p. 220-230, 2016.
    
7. VIDA, TALITA A. ; Freitas, Emmanuelle S. ; Brito, Crystopher ; Cheung, Noé ; ARENAS, MARIA A. ; CONDE, ANA ; DE DAMBORENEA, JUAN ; Garcia, Amauri . Thermal Parameters and Microstructural Development in Directionally Solidified Zn-Rich Zn-Mg Alloys. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, v. 47, p. 3052-3064, 2016.
    
8. SPINELLI, J E ; MACEDO, R A ; SILVA, B L ; GARCIA, A . Correlation between microstructure and hardness of a Bi-1.5wt%Ag lead-free solder alloy. IOP Conference Series: Materials Science and Engineering (Print), v. 117, p. 012028, 2016.
    
9. BRAGA, JOSÉ F A ; SILVA, CÁSSIO A P ; SPINELLI, JOSÉ E ; Garcia, Amauri ; SILVA, ADRINA P . Lei de Crescimento em Função da Posição para Ligas do Sistema Monotético. Semina. Ciências Exatas e Tecnológicas (Online), v. 37, p. 35, 2016.
    
10. Peixoto, Leandro C. ; BORTOLOZO, AUSDINIR D. ; Garcia, Amauri ; Osório, Wislei R. . Performance of New Pb-Bi Alloys for Pb-Acid Battery Applications: EIS and Polarization Study. Journal of Materials Engineering and Performance (Print), v. 25, p. 2211-2221, 2016.
     
11. COSTA, THIAGO A. ; DIAS, MARCELINO ; Gomes, Laércio G. ; ROCHA, OTÁVIO L. ; Garcia, Amauri . Effect of solution time in T6 heat treatment on microstructure and hardness of a directionally solidified Al-Si-Cu alloy. Journal of Alloys and Compounds, v. 683, p. 485-494, 2016.
     
12. REYES, RODRIGO V. ; KAKITANI, RAFAEL ; COSTA, THIAGO A. ; Spinelli, José E.; Noé Cheung ; Garcia, Amauri . Cooling thermal parameters, microstructural spacing and mechanical properties in a directionally solidified hypereutectic Al-Si alloy. Philosophical Magazine Letters (Print), v. 96, p. 228-237, 2016.
     
13. Osório, Wislei R. ; Garcia, Amauri . Interrelation of wettability-microstructure-tensile strength of lead-free Sn-Ag and Sn-Bi solder alloys. Science and Technology of Welding and Joining, v. 21, p. 1-9, 2016.
     
14. SANTOS, WASHINGTON L.R. ; SILVA, BISMARCK LUIZ ; Bertelli, Felipe ; Spinelli, José E. ; Cheung, Noé ; Garcia, Amauri . An alternative thermal approach to evaluate the wettability of solder alloys. Applied Thermal Engineering, v. 107, p. 431-440, 2016.
     
15. KONNO, C. Y. N. ; VASCONCELOS, A. J. ; BARROS, A. S. ; SILVA, A. P. ; ROCHA, O. F. L. ; GARCIA, A. ; SPINELLI, J E . Analysis of the Microstructural Evolution During the Transient Upward, Downward and Horizontal Directional Solidification of the Al-1.2wt%Pb Monotectic Alloy. Materials Science Forum (Online), v. 869, p. 429-434, 2016.
     
16. Jácome, Paulo A.D. ; FERNANDES, M. T. ; GARCIA, A. ; FERREIRA, A. F. ; CASTRO, J. A. ; FERREIRA, I. L. . Application of Computational Thermodynamics to the Evaluation of Surface Tension and Gibbs-Thomson Coefficient during Multicomponent Aluminum Alloy Solidification. Materials Science Forum (Online), v. 869, p. 416-422, 2016.
     
17. COSTA, THIAGO A. ; DIAS, MARCELINO ; Freitas, Emmanuelle S. ; Casteletti, Luiz C. ; Garcia, Amauri . The effect of microstructure length scale on dry sliding wear behaviour of monotectic Al-Bi-Sn alloys. Journal of Alloys and Compounds, v. 689, p. 767-776, 2016.

2015

1. Castanho, M. A. P. ; Goulart, P. R. ; Brito, C. ; Spinelli, J. E. ; Cheung, N. ; Garcia, A. . Steady and unsteady state peritectic solidification. Materials Science and Technology, v. 31, p. 105-114, 2015.
    
2. Silva, Bismarck Luiz ; Cheung, Noé ; Garcia, Amauri ; Spinelli, José Eduardo . Evaluation of solder/substrate thermal conductance and wetting angle of Sn-0.7wt%Cu-(0-0.1wt%Ni) solder alloys. Materials Letters (General ed.), v. 142, p. 163-167, 2015.
    
3. Gomes, Laércio G. ; Moutinho, Daniel J. ; Ferreira, Ivaldo L. ; ROCHA, OTÁVIO L. ; Garcia, Amauri . The Growth of Secondary Dendritic Arms in Directionally Solidified Al-Si-Cu Alloys: A Comparative Study with Binary Al-Si Alloys. Applied Mechanics and Materials, v. 719-720, p. 102-105, 2015.
    
4. Silva, Bismarck Luiz ; Cheung, Noé ; Garcia, Amauri ; Spinelli, José Eduardo . Sn-0.7wt%Cu-(xNi) alloys: Microstructure-mechanical properties correlations with solder/substrate interfacial heat transfer coefficient. Journal of Alloys and Compounds, v. 632, p. 274-285, 2015.
    
5. Bertelli, Felipe ; Brito, Crystopher ; Ferreira, Ivaldo L. ; REINHART, GUILLAUME ; NGUYEN-THI, HENRI ; Mangelinck-Noël, Nathalie ; Cheung, Noé ; Garcia, Amauri . Cooling thermal parameters, microstructure, segregation and hardness in directionally solidified Al-Sn-(Si;Cu) alloys. Materials in Engineering (Cessou em 1982. Cont. ISSN 0264-1275 Materials and Design), v. 72, p. 31-42, 2015.
    
6. Brito, Crystopher ; Reinhart, Guillaume ; Nguyen-Thi, Henri ; Mangelinck-Noël, Nathalie ; Cheung, Noé ; Spinelli, José E. ; Garcia, Amauri . High cooling rate cells, dendrites, microstructural spacings and microhardness in a directionally solidified Al-Mg-Si alloy. Journal of Alloys and Compounds, v. 636, p. 145-149, 2015.
    
7. Rocha, Otávio Lima ; Gomes, Laércio Gouvea ; Moutinho, Daniel Joaquim Conceição ; Ferreira, Ivaldo Leão ; Garcia, Amauri . The columnar to equiaxed transition in the directional solidification of aluminum based multicomponent alloys. REM. Revista Escola de Minas (Impresso), v. 68, p. 85-90, 2015.
    
8. Osório, Wislei R. ; Canté, Manuel V. ; Brito, Crystopher ; Freitas, Emmanuelle S. ; Garcia, Amauri . Electrochemical Behavior of an Al-Fe-Ni Alloy Affected by Nano-Sized Intermetallic Particles. Corrosion (Houston, Tex.), v. 71, p. 510-522, 2015.
    
9. Silva, Bismarck Luiz ; Spinelli, José Eduardo ; Canté, Manuel V. ; Bertelli, Felipe ; Cheung, Noé ; Riva, Rudimar ; Garcia, Amauri . Experimental and numerical analyses of laser remelted Sn-0.7 wt%Cu solder surfaces. Journal of Materials Science. Materials in Electronics, v. 26, p. 3100-3107, 2015.
    
10. Dias, Marcelino ; Costa, Thiago ; Rocha, Otávio ; Spinelli, José E. ; Cheung, Noé ; Garcia, Amauri . Interconnection of thermal parameters, microstructure and mechanical properties in directionally solidified Sn-Sb lead-free solder alloys. Materials Characterization, v. 106, p. 52-61, 2015.
     
11. Costa, T. A. ; Moreira, A. L. ; Moutinho, D. J. ; Dias, M. ; Ferreira, I. L. ; Spinelli, J. E. ; Rocha, O. L. ; Garcia, A. . Growth direction and Si alloying affecting directionally solidified structures of Al-Cu-Si alloys. Materials Science and Technology, v. 31, p. 1103-1112, 2015.
     
12. Brito, Crystopher ; Costa, Thiago A. ; Vida, Talita A. ; Bertelli, Felipe ; Cheung, Noé ; Spinelli, José Eduardo ; Garcia, Amauri . Characterization of Dendritic Microstructure, Intermetallic Phases, and Hardness of Directionally Solidified Al-Mg and Al-Mg-Si Alloys. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, v. 46, p. 3342-3355, 2015.
     
13. Brito, Crystopher ; Costa, Thiago A. ; Vida, Talita A. ; Bertelli, Felipe ; Cheung, Noé ; Spinelli, José Eduardo ; Garcia, Amauri . Erratum to: Characterization of Dendritic Microstructure, Intermetallic Phases, and Hardness of Directionally Solidified Al-Mg and Al-Mg-Si Alloys. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, v. 46, p. 3786-3788, 2015.
     
14. Santos, Washington L.R. ; Brito, Crystopher ; Bertelli, Felipe ; Spinelli, José E. ; Garcia, Amauri . Microstructural development of hypoeutectic Zn-(10-40)wt%Sn solder alloys and impacts of interphase spacing and macrosegregation pattern on hardness. Journal of Alloys and Compounds, v. 647, p. 989-996, 2015.
     
15. Silva, Bismarck Luiz ; Reinhart, Guillaume ; Nguyen-Thi, Henri ; Mangelinck-Noël, Nathalie ; Garcia, Amauri ; Spinelli, José Eduardo . Microstructural development and mechanical properties of a near-eutectic directionally solidified Sn-Bi solder alloy. Materials Characterization, v. 107, p. 43-53, 2015.
     
16. Osório, Wislei R. ; Peixoto, Leandro C. ; Garcia, Amauri . Electrochemical and Mechanical Behavior of Lead-Silver and Lead-Bismuth Casting Alloys for Lead-Acid Battery Components. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, v. 46, p. 4255-4267, 2015.
     
17. Costa, Thiago A. ; Freitas, Emmanuelle S. ; Dias, Marcelino ; Brito, Crystopher ; Cheung, Noé ; Garcia, Amauri . Monotectic Al-Bi-Sn alloys directionally solidified: Effects of Bi content, growth rate and cooling rate on the microstructural evolution and hardness. Journal of Alloys and Compounds, v. 653, p. 243-254, 2015.
     
18. Nascimento, Fabiana C. ; Paresque, Mara C.C. ; de Castro, José A. ; Jácome, Paulo A.D. ; Garcia, Amauri ; Ferreira, Ivaldo L. . Application of computational thermodynamics to the determination of thermophysical properties as a function of temperature for multicomponent Al-based alloys. Thermochimica Acta (Print), v. 619, p. 1-7, 2015.
     
19. Faria, Jonas Dias ; Brito, Crystopher Cardoso de ; Costa, Thiago Antônio Paixão de Sousa ; Verissimo, Nathália Carolina ; Santos, Washington Luis Reis ; Dias Filho, José Marcelino da Silva ; Garcia, Amauri ; Cheung, Noé . Influência na microestrutura e na microdureza decorrente da adição de 4%Ag na liga Al-4%Cu solidificada unidirecionalmente. Matéria (UFRJ), v. 20, p. 992-1007, 2015.
     
20. Duarte, Roberto N. ; Faria, Jonas D. ; Brito, Crystopher ; Veríssimo, Nathalia C. ; Cheung, Noé ; Garcia, Amauri . Length scale of the dendritic microstructure affecting tensile properties of Al-(Ag)-(Cu) alloys. International Journal of Modern Physics B, v. 29, p. 1550261-15502619, 2015.

2014

1. Santos, Washington L.R. ; Brito, Crystopher ; Quaresma, José M.V.;Spinelli, José E.;Garcia, Amauri . Plate-like cell growth during directional solidification of a Zn-20wt%Sn high-temperature lead-free solder alloy. Materials Science & Engineering. B, Solid-State Materials for Advanced Technology, v. 182, p. 29-36, 2014.
    
2. Spinelli, José Eduardo ; Garcia, Amauri . Development of solidification microstructure and tensile mechanical properties of Sn-0.7Cu and Sn-0.7Cu-2.0Ag solders. Journal of Materials Science. Materials in Electronics, v. 25, p. 478-486, 2014.
    
3. Osório, Wislei R. ; Freitas, Emmanuelle S. ; Spinelli, José E. ; Garcia, Amauri . Electrochemical behavior of a lead-free Sn-Cu solder alloy in NaCl solution. Corrosion Science, v. 80, p. 71-81, 2014.
    
4. Dias, Marcelino ; Brito, Crystopher ; Bertelli, Felipe ; Garcia, Amauri . Cellular growth of single-phase Zn-Ag alloys unidirectionally solidified. Materials Chemistry and Physics, v. 143, p. 895-899, 2014. 
    
5. Osório, Wislei R. ; Freitas, Emmanuelle S. ; Garcia, Amauri . Corrosion Performance Based on the Microstructural Array of Al-Based Monotectic Alloys in a NaCl Solution. Journal of Materials Engineering and Performance, v. 23, p. 333-341, 2014.
    
6. Spinelli, José Eduardo; Silva, Bismarck Luiz ; Garcia, Amauri. Microstructure, phases morphologies and hardness of a Bi-Ag eutectic alloy for high temperature soldering applications. Materials in Engineering (Cessou em 1982. Cont. ISSN 0264-1275 Materials and Design), v. 58, p. 482-490, 2014.
    
7. Silva, Adrina M.; Garcia, Amauri; Spinelli, J.E.. Microstructural Morphologies and Experimental Growth Laws during Solidification of Monotectic and Hypermonotectic Al-Pb Alloys. Journal of Materials Science & Technology, v. 30, p. 401-407, 2014.
    
8. Spinelli, José Eduardo ; Silva, Bismarck Luiz ; Garcia, Amauri. Assessment of Tertiary Dendritic Growth and Its Effects on Mechanical Properties of Directionally Solidified Sn-0.7Cu-xAg Solder Alloys. Journal of Electronic Materials, v. 43, p. 1347-1361, 2014.
    
9. Freitas, Emmanuelle S. ; Osório, Wislei R.; Spinelli, J.E.;  Garcia, Amauri. Mechanical and corrosion resistances of a Sn-0.7wt.%Cu lead-free solder alloy. Microelectronics and Reliability, v. 54, p. 1392-1400, 2014.
    
10. Freitas, Emmanuelle S. ; Silva, Adrina P.; Spinelli, J.E. ; Casteletti, Luiz C. ;  Garcia, Amauri Inter-relation of Microstructural Features and Dry Sliding Wear Behavior of Monotectic Al-Bi and Al-Pb Alloys. Tribology Letter, v. 55, p. 111-120, 2014.
     
11. Spinelli, J.E.; Silva, B. L. ; Cheung, N.; Garcia, Amauri . The Use of a Directional Solidification Technique to Investigate the Interrelationship of Thermal Parameters, Microstructure and Microhardness of Bi-Ag Solder Alloys. Materials Characterization, v. 96, p. 115-125, 2014.
     
12. Dias, M. ; Brito, C. ; Bertelli, F. ; Rocha, O. L. ;  Garcia, Amauri. . Interconnection of Thermal Parameters, Microstructure, Macrosegregation and Microhardness of Unidirectionally Solidified Zn-rich Zn-Ag Peritectic Alloys. Materials in Engineering (Cessou em 1982. Cont. ISSN 0264-1275 Materials and Design), v. 63, p. 848-855, 2014.
     
13. Osório, Wislei R. ; Bortolozo, Ausdinir D. ; Peixoto, Leandro C.; Garcia, Amauri. Mechanical performance and microstructure array of as-cast lead-silver and lead-bismuth alloys. Journal of Power Sources (Print), v. 271, p. 124-133, 2014.
     
14. Osório, Wislei R.; Freitas, Emmanuelle S. ; Garcia, Amauri. Electrochemical Impedance Spectroscopy and Potentiodynamic Polarization Studies Affected by the Microstructure Array of a Monotectic Al-Pb Alloy in a NaCl Solution. Corrosion (Houston, Tex.), v. 70, p. 1031-1042, 2014.
     
15. Silva, Bismarck Luiz; Garcia, Amauri; Spinelli, José Eduardo. The roles of dendritic spacings and Ag3Sn intermetallics on hardness of the SAC307 solder alloy. Microelectronics and Reliability, v. 54, p. 2929-2934, 2014.
     
16. Spinelli, José Eduardo; Cheung, Noé; Osório, Wislei Riuper Ramos ; Freitas, Emmanuelle Sá ; Garcia, Amauri . Correlação entre microestrutura, resistências mecânica e à corrosão da liga de soldagem livre de chumbo Sn-0,7%Cu*. Tecnologia em Metalurgia, Materiais e Mineração (Impresso), v. 11, p. 277-286, 2014.
     
17. Bertelli, Felipe; Silva-Santos, Carlos H.; Bezerra, Débora J.; Cheung, Noé; Garcia, Amauri. An Effective Inverse Heat Transfer Procedure Based on Evolutionary Algorithms to Determine Cooling Conditions of a Steel Continuous Casting Machine. Materials and Manufacturing Processes, v. 30, p. 414-424, 2014.

2013

1. Silva, Bismarck Luiz ; Cheung, Noé ; Garcia, Amauri ; Spinelli, José Eduardo . Thermal Parameters, Microstructure, and Mechanical Properties of Directionally Solidified Sn-0.7 wt.%Cu Solder Alloys Containing 0 ppm to 1000 ppm Ni. Journal of Electronic Materials, v. 42, p. 179-191, 2013. 
    
2. Deghaid Pereira, P. ; Spinelli, J. E. ;Garcia, Amauri . Combined effects of Ag content and cooling rate on microstructure and mechanical behavior of Sn Ag Cu solders. Materials in Engineering (Cessou em 1982. Cont. ISSN 0264-1275 Materials and Design), v. 45, p. 377-383, 2013. 
    
3. Reis, B.P. ; FRANÇA, R.P. ; SPIM, J.A. ; Garcia, A. ; DA COSTA, E.M. ; SANTOS, C.A. . The effects of dendritic arm spacing (as-cast) and aging time (solution heat-treated) of Al Cu alloy on hardness. Journal of Alloys and Compounds, v. 549, p. 324-335, 2013. 
    
4. Jácome, P. D. ; Moutinho, D.J. ; Gomes, L.G. ; Garcia, A. ; FERREIRA, A. F. ; Ferreira, Ivaldo Leão . The Application of Computational Thermodynamics for the Determination of Surface Tension and gibbs-Thomson Coefficient of Aluminum Ternary Alloys. Materials Science Forum, v. 730-732, p. 871-876, 2013. 
    
5. Cheung, Noé ; TACONI, L. L. ; Garcia, A. . Assessment of Cooling Conditions of a Continuous Casting Machine for Steel Billets based on Surface Temperature Measurements. Materials Science Forum, v. 730-732, p. 841-846, 2013 
    
6. Silva, Adrina P. ; Goulart, Pedro R. ; Spinelli, José E. ; Garcia, Amauri . Microstructural Evolution During the Directional Transient Solidification of a Hypomonotectic Al-0.9wt%Pb Alloy. Materials Science Forum, v. 730-732, p. 829-834, 2013. 
    
7. Dias, A. C. P. ; Meza, Elisangela S. ; Bertelli, Felipe ; Goulart, Pedro R. ; Cheung, Noé ; Garcia, Amauri . Effect of Mold Surface Roughness on the Interfacial Heat Transfer Coefficient during Solidification of Solder Alloys. Materials Science Forum, v. 730-732, p. 751-756, 2013. 
    
8. Bertelli, Felipe ; Meza, Elisangela S. ; Bezerra, D. J. ; Goulart, Pedro R. ; Cheung, Noé ; Garcia, Amauri . Heat Transfer Characteristics of Inward, Outward and Upward Solidification of an Al-1.5wt%Fe Alloy in Cylindrical Chill Molds. Materials Science Forum, v. 730-732, p. 805-810, 2013. 
    
9. Castanho, M. A. P. ; Goulart, Pedro R. ; Cheung, Noé ; Garcia, Amauri . Unsteady-State Directional Solidification of a Hypoperitectic Pb-9.5wt%Bi Alloy. Materials Science Forum, v. 730-732, p. 889-894, 2013. 
    
10. Moutinho, Daniel J. ; Gomes, Laércio G. ; Rocha, O.L. ; Ferreira, Ivaldo L. ; Garcia, Amauri . Thermal Parameters, Microstructure and Porosity During Transient Solidification of Ternary Al-Cu-Si Alloys. Materials Science Forum, v. 730-732, p. 883-888, 2013. 
     
11. Spinelli, José Eduardo ; Garcia, Amauri . Microstructural development and mechanical properties of hypereutectic Sn Cu solderalloys. Materials Science & Engineering. A, Structural Materials: Properties, Microstructure and Processing, v. 568, p. 195-201, 2013. 
     
12. Cheung, Noé ; Garcia, Amauri ; Spinelli, José Eduardo . Microstructure and Mechanical Properties of Directionally Solidified Unmodified and Ni-Modified Sn-0.7wt%Cu Lead-Free Solder Alloy. Defect and Diffusion Forum, v. 333, p. 107-115, 2013. 
     
13. Osório, Wislei R. ; LEIVA, DANIEL R. ; Peixoto, Leandro C. ; Garcia, Leonardo R. ; Garcia, Amauri . Mechanical properties of Sn Ag lead-free solder alloys based on the dendritic array and Ag3Sn morphology. Journal of Alloys and Compounds, v. 562, p. 194-204, 2013. 
     
14. Meza, Elisangela S. ; Bertelli, Felipe ; Goulart, Pedro R. ; Cheung, Noé ; Garcia, Amauri . The effect of the growth rate on microsegregation: experimental investigation in hypoeutectic Al-Fe and Al-Cu alloys directionally solidified. Journal of Alloys and Compounds, v. 561, p. 193-200, 2013. 
     
15. Osório, Wislei R. ; Peixoto, Leandro C. ; Garcia, Leonardo R. ; Mangelinck-Noël, Nathalie ; Garcia, Amauri . Microstructure and mechanical properties of Sn-Bi, Sn-Ag and Sn-Zn lead-free solder alloys. Journal of Alloys and Compounds, v. 572, p. 97-106, 2013.  
     
16. Osório, Wislei R. ; Freitas, Emmanuelle S. ; Garcia, Amauri . EIS and potentiodynamic polarization studies on immiscible monotectic Al-In alloys. Electrochimica Acta, v. 102C, p. 436-445, 2013. 
     
17. Osório, Wislei R. ; Peixoto, Leandro C. ; Garcia, Amauri . The effects of Ag content and dendrite spacing on the electrochemical behavior of Pb-Ag alloys for Pb-acid battery components. Journal of Power Sources (Print), v. 238, p. 324-335, 2013. 
     
18. Canté, Manuel V. ; Brito, Crystopher ; Spinelli, José E. ; Garcia, Amauri . Interrelation of cell spacing, intermetallic compounds and hardness on a directionally solidified Al-1.0Fe-1.0Ni alloy. Materials in Engineering (Cessou em 1982. Cont. ISSN 0264-1275 Materials and Design), v. 51, p. 342-346, 2013. 
     
19. Freitas, Emmanuelle S. ; Spinelli, José E. ; Casteletti, Luiz C. ; Garcia, Amauri . Microstructure-wear behavior correlation on a directionally solidified Al-In monotectic alloy. Tribology International, v. 66, p. 182-186, 2013.
     
20. Cheung, T. ; CHEUNG, N. ; Tobar, C. M. T. ; MEI, P. R. ; Garcia, A. . Zone Refining of Tin: Optimization of Zone Length by a Genetic Algorithm. Materials and Manufacturing Processes, v. 28, p. 746-752, 2013.
     
21. Osório, Wislei R. ; Freitas, Emmanuelle S. ; Garcia, Amauri . EIS parameters and cell spacings of an Al-Bi alloy in NaCl solution. Electrochimica Acta, v. 108, p. 781-787, 2013. 
     
22. Bertelli, Felipe ; Cheung, Noé ; Garcia, Amauri . Inward solidification of cylinders: Reversal in the growth rate and microstructure evolution. Applied Thermal Engineering, v. 61, p. 577-582, 2013. 

2012

1. Spinelli, José E. ; Cheung, Noé ; Goulart, Pedro R. ; Quaresma, José M.V. ; Garcia, Amauri . Design of mechanical properties of Al-alloys chill castings based on the metal/mold interfacial heat transfer coefficient. International Journal of Thermal Sciences , v. 51, p. 145-154, 2012. 
    
2. Osório, Wislei R. ; Rosa, Daniel M. ; Garcia, Amauri . Electrochemical behaviour of a Pb Sb alloy in 0.5M NaCl and 0.5M H2SO4 solutions. Materials in Engineering, Materials and Design, v. 34, p. 660-665, 2012. 
    
3. Moura, Itamazeo T.L. ; Silva, Celina L.M. ; Cheung, Noé ; Goulart, Pedro R. ; Garcia, Amauri ; Spinelli, José E. . Cellular to dendritic transition during transient solidification of a eutectic Sn 0.7wt%Cu solder alloy. Materials Chemistry and Physics , v. 132, p. 203-209, 2012. 
    
4. Osório, Wislei R. ; Freitas, Emmanuelle S. ; Peixoto, Leandro C. ; Spinelli, José E.; Garcia, Amauri . The effects of tertiary dendrite arm spacing and segregation on the corrosion behavior of a Pb Sb alloy for lead-acid battery components. Journal of Power Sources, v. 207, p. 183-190, 2012.
    
5. Osório, Wislei R. ; Spinelli, José E. ; Afonso, Conrado R.M. ; Peixoto, Leandro C. ; Garcia, Amauri . Electrochemical corrosion behavior of gas atomized Al Ni alloy powders. Electrochimica Acta, v. 69, p. 371-378, 2012.
    
6. Silva, A. P.; Freitas, E. S.; Goulart, P. R. ; Garcia, A.; Spinelli, J. E. . On the growth of the minority phase during downward transient directional solidification of hypomonotectic and monotectic Al Pb alloys. Journal of Materials Science, v. 47, p. 5581-5589, 2012.
    
7. Brito, Crystopher; Siqueira, Claudio A. ; Spinelli, José E.; Garcia, Amauri . Effects of cell morphology and macrosegregation of directionally solidified Zn-rich Zn Cu alloys on the resulting microhardness. Materials Letters (General ed.), v. 80, p. 106-109, 2012.
    
8. Brito, Crystopher; Siqueira, Claudio A.; Spinelli, José E.; Garcia, Amauri. Cellular growth during the transient directional solidification of Zn-rich Zn Cu monophasic and peritectic alloys. Journal of Physics and Chemistry of Solids, v. 73, p. 1173-1181, 2012.
    
9. Osório, Wislei R.; Brito, Crystopher; Peixoto, Leandro C., Garcia, Amauri;  Electrochemical behavior of Zn-rich Zn Cu peritectic alloys affected by macrosegregation and microstructural array. Electrochimica Acta, v. 76, p. 218-228, 2012.
    
10. Osório, Wislei R.; Freire, Celia M.; Caram, Rubens; Garcia, Amauri. The role of Cu-based intermetallics on the pitting corrosion behavior of Sn-Cu, Ti-Cu and Al-Cu alloys. Electrochimica Acta, v. 77, p. 189-197, 2012.
     
11. Osório, Wislei R.; Peixoto, Leandro C.; Garcia, Leonardo R.; Garcia, Amauri; Spinelli, Jose E. The Effects of Microstructure and Ag3Sn and Cu6Sn5 Intermetallics on the Electrochemical Behavior of Sn-Ag and Sn-Cu Solder Alloys. International Journal of Electrochemical Science (Online), v. 7, p. 6436-6452, 2012.
     
12. Afonso, Conrado Ramos Moreira; Spinelli, José Eduardo; Bolfarini, Claudemiro; Botta, Walter José ; Kiminami, Claudio Shyinti ; Garcia, Amauri . Rapid solidification of an Al-5Ni alloy processed by spray forming. Materials Research (São Carlos. Impress, v. 15, p. 779-785, 2012.
     
13. Bertelli, Felipe ; Brito, Crystopher; Meza, Elisangela S; Cheung, Noé; Garcia, Amauri . Inward and outward solidification of cylindrical castings: The role of the metal/mold heat transfer coefficient. Materials Chemistry and Physics, v. 136, p. 545-554, 2012.
     
14. Silva, Bismarck L.; Garcia, Amauri; Spinelli, José E.. The effects of microstructure and intermetallic phases of directionally solidified Al Fe alloys on microhardness. Materials Letters (General ed.), v. 89, p. 291-295, 2012.
     
15. Silva, Adrina P.; Silva, Adrina P.; Goulart, Pedro R.; Garcia, Amauri; Spinelli, José E.; Spinelli, José E.; Garcia, Amauri; Goulart, Pedro R. . Microstructural development during transient directional solidification of a hypomonotectic Al In alloy. Philosophical Magazine Letters (Print), v. 92, p. 442-450, 2012.
     
16. Osório, Wislei R.; Freitas, Emmanuelle S.; Spinelli, Jose E.; Cante, Manuel V.; Afonso, Conrado R.M.; Garcia, Amauri;Assessment of Electrochemical and Mechanical Behavior of Hot-Extruded Powders and As-Cast Samples of Al-Ni Alloys. International Journal of Electrochemical Science (Online), v. 7, p. 9946-9971, 2012.

2011

1. Barcellos, Vinicius ; Ferreira, Carlos ; Spim, Jaime ; dos Santos, Carlos ; Garcia, Amauri . The Interrelation between Casting Size, Steel Grade, and Temperature Evolution Along the Mold Length and at the Strand Surface during Continuous Casting of Steel. Materials and Manufacturing Processes, v. 26, p. 113-126, 2011. 
    
2. Garcia, Leonardo R. ; Osório, Wislei R. ; Garcia, Amauri . The effect of cooling rate on the dendritic spacing and morphology of Ag3Sn intermetallic particles of a SnAg solder alloy. Materials in Engineering (Cessou em 1982. Cont. ISSN 0264-1275 Materials and Design), v. 32, p. 3008-3012, 2011.
    
3. Cheung, T. ; CHEUNG, N. ; Tobar, C. M. T. ; CARAM, R. ; Garcia, A. . Application of a Genetic Algorithm to Optimize Purification in the Zone Refining Process. Materials and Manufacturing Processes, v. 26, p. 493-500, 2011.
    
4. Gomes, L.G. ; Jácome, P. D. ; Ferreira, Ileao L. ; Moutinho, D.J. ; Rocha, O.L. ; Garcia, Amauri . Macrosegregation and Porosity during Directional Solidification of a Ternary Al-9wt%Si-3wt%Cu Alloy. Defect and Diffusion Forum, v. 312-315, p. 405-410, 2011.
    
5. Spinelli, Jose ; Cheung, Noe ; Garcia, Amauri . On array models theoretical predictions versus measurements for the growth of cells and dendrites in the transient solidification of binary alloys. Philosophical Magazine (2003. Print), v. 91, p. 1705-1723, 2011. 
    
6. Silva, Bismarck ; Araujo, Igor ; Silva, Wanderson ; Goulart, Pedro ; Garcia, Amauri ; Spinelli, Jose . Correlation between dendrite arm spacing and microhardness during unsteady-state directional solidification of Al-Ni alloys. Philosophical Magazine Letters (Print), v. 91, p. 337-343, 2011. 
    
7. Osório, Wislei R. ; Peixoto, Leandro C. ; Moutinho, Daniel J. ; Gomes, Laércio G. ; Ferreira, Ivaldo L. ; Garcia, Amauri . Corrosion resistance of directionally solidified Al 6Cu 1Si and Al 8Cu 3Si alloys castings. Materials in Engineering (Cessou em 1982. Cont. ISSN 0264-1275 Materials and Design), v. 32, p. 3832-3837, 2011. 
    
8. Bertelli, Felipe ; Meza, Elisangela S. ; Goulart, Pedro R. ; Cheung, Noé ; Riva, Rudimar ; Garcia, Amauri . Laser remelting of Al 1.5wt%Fe alloy surfaces: Numerical and experimental analyses. Optics and Lasers in Engineering, v. 49, p. 490-497, 2011. 
    
9. Osório, Wislei R. ; Peixoto, Leandro C. ; Garcia, A. . Electrochemical Parameters of Equiaxed and Columnar Grain Arrays of a Pb1wt%Sn Alloy for Lead-Acid Battery Applications. International Journal of Electrochemical Science (Online), v. 6, p. 1522-1536, 2011. 
    
10. Osório, Wislei R. ; Rosa, Daniel M. ; Peixoto, Leandro C. ; Garcia, Amauri . Cell/dendrite Transition and Electrochemical Corrosion of Pb-Sb Alloys for Lead-Acid Battery Applications. Journal of Power Sources (Print), v. 196, p. 6567-6572, 2011.
     
11. Araujo, Igor Jefferson Cabral ; Silva, Bismarck Luiz da ; Spinelli, José Eduardo ; Garcia, Amauri . Evolution of eutectic spacing during unidirectional solidification of Al-Ni alloys. Materials Research (São Carlos. Impresso), v. 14, p. 268-273, 2011.
     
12. Osório, Wislei R. ; Garcia, Leonardo R. ; Peixoto, Leandro C. ; Garcia, Amauri . Electrochemical behavior of a lead-free SnAg solder alloy affected by the microstructure array. Materials in Engineering (Cessou em 1982. Cont. ISSN 0264-1275 Materials and Design), v. 32, p. 4763-4772, 2011. 
     
13. Jácome, Paulo A.D. ; Landim, Mariana C. ; Garcia, Amauri ; Furtado, Alexandre F. ; Ferreira, Ivaldo L. . The application of computational thermodynamics and a numerical model for the determination of surface tension and Gibbs Thomson coefficient of aluminum based alloys. Thermochimica Acta (Print), v. 523, p. 142-149, 2011. 
     
14. Osório, Wislei R. ; Rosa, Daniel M. ; Garcia, Amauri . Electrolyte features and microstructure affecting the electrochemical performance of a Pb Sb alloy for lead-acid battery components. Electrochimica Acta, v. 56, p. 8457-8462, 2011. 
     
15. Osório, Wislei R. ; Moutinho, Daniel J. ; Peixoto, Leandro C. ; Ferreira, Ivaldo L. ; Garcia, Amauri . Macrosegregation and microstructure dendritic array affecting the electrochemical behaviour of ternary Al Cu Si alloys. Electrochimica Acta, v. 56, p. 8412-8421, 2011. 
     
16. Osório, Wislei R. ; Spinelli, José E. ; Afonso, Conrado R.M. ; Peixoto, Leandro C. ; Garcia, Amauri . Microstructure, corrosion behaviour and microhardness of a directionally solidified Sn Cu solder alloy. Electrochimica Acta, v. 56, p. 8891-8899, 2011.
     
17. Silva, Adrina P. ; Garcia, Amauri ; Spinelli, José E. . Microstructure morphologies during the transient solidification of hypomonotectic and monotectic Al Pb alloys. Journal of Alloys and Compounds, v. 509, p. 10098-10104, 2011.
     
18. Jácome, Paulo A.D. ; Landim, Mariana C. ; Garcia, Amauri ; Furtado, Alexandre F. ; Ferreira, Ivaldo L. . Corrigendum to The application of computational thermodynamics and a numerical model for the determination of surface tension and Gibbs Thomson coefficient of aluminum based alloys [Thermochim. Acta 523 (2011) 142 149]. Thermochimica Acta (Print), v. 526, p. 262-263, 2011. 
     
19. Freitas, Emmanuelle S. ; Rosa, Daniel M. ; Garcia, Amauri ; Spinelli, José E. . Growth of tertiary dendritic arms during the transient directional solidification of hypoeutectic Pb Sb alloys. Philosophical Magazine (2003. Print), v. 91, p. 4474-4485, 2011.
     
20. OSÓRIO, W. R. R. ; SIQUEIRA, C. ; SANTOS, C. A. ; GARCIA, A. . The Correlation between Electrochemical Corrosion Resistance and Mechanical Strength of as-cast Al-Cu and Al-Si Alloys. International Journal of Electrochemical Science (Online), v. 6, p. 6275-6289, 2011.

2010

1. Peixoto, Leandro C. ; Osório, Wislei R. ; Garcia, Amauri . The interrelation between mechanical properties, corrosion resistance and microstructure of Pb Sn casting alloys for lead-acid battery components. Journal of Power Sources, v. 195, p. 621-630, 2010.
    
2. Goulart, Pedro R. ; Spinelli, José E. ; Cheung, Noé ; Garcia, Amauri . The effects of cell spacing and distribution of intermetallic fibers on the mechanical properties of hypoeutectic Al Fe alloys. Materials Chemistry and Physics, v. 119, p. 272-278, 2010.
    
3. Osório, Wislei R. ; Peixoto, Leandro C. ; Garcia, Amauri . Comparison of electrochemical performance of as-cast Pb 1wt.% Sn and Pb 1wt.% Sb alloys for lead-acid battery components. Journal of Power Sources (Print), v. 195, p. 1726-1730, 2010.
    
4. Osório, Wislei R. ; Cremasco, Alessandra ; Andrade, Protásio N. ; Garcia, Amauri ; Caram, Rubens . Electrochemical behavior of centrifuged cast and heat treated Ti Cu alloys for medical applications. Electrochimica Acta, v. 55, p. 759-770, 2010.
    
5. Cheung, Thais ; Cheung, Noé ; Garcia, Amauri . Application of an Artificial Intelligence Technique to Improve Purification in the Zone Refining Process. Journal of Electronic Materials , v. 39, p. 49-55, 2010. 
    
6. Spinelli, J.E. ; Canté, M.V. ; Cheung, Noé ; Mangelinck-Noël, Nathalie ; Garcia, Amauri . SEM Characterization of Al3Ni Intermetallics and its Influence on Mechanical Properties of Directionally Solidified Hypoeutectic Al-Ni Alloys. Materials Science Forum, v. 636-637, p. 465-470, 2010. 
    
7. Goulart, Pedro R. ; Spinelli, J.E. ; BERTELLI, F. ; Osório, Wislei R.R. ; Cheung, Noé ; Garcia, Amauri . Cellular Microstructure and Mechanical Properties of a Directionally Solidified Al-1.0wt%Fe Alloy. Materials Science Forum, v. 636-637, p. 564-570, 2010. 
    
8. Ferreira, Ivaldo L. ; Moutinho, D.J. ; Gomes, L.G. ; Rocha, O.L. ; Goulart, Pedro R. ; Garcia, Amauri . Microstructural Development in a Ternary Al-Cu-Si Alloy during Transient Solidification. Materials Science Forum, v. 636-637, p. 643-650, 2010.
    
9. Cheung, Noé ; Larosa, M.A. ; Osório, Wislei R.R. ; Lima, M.S.F ; Lerardi, Maria Clara F. ; Garcia, Amauri . Numerical Simulation and Experimental Analysis of Laser Surface Remelting of AISI 304 Stainless Steel Samples. Materials Science Forum, v. 636-637, p. 1119-1124, 2010. 
    
10. Garcia, Leonardo R. ; Osório, Wislei R. ; Peixoto, Leandro C. ; Garcia, Amauri . Mechanical properties of Sn Zn lead-free solder alloys based on the microstructure array. Materials Characterization, v. 61, p. 212-220, 2010.
     
11. Canté, Manuel V. ; Spinelli, José E. ; Cheung, Noé ; Garcia, Amauri . The correlation between dendritic microstructure and mechanical properties of directionally solidified hypoeutectic Al-Ni alloys. Metals and Materials International, v. 16, p. 39-49, 2010.
     
12. Cruz, Kleber S. ; Meza, Elisangela S. ; Fernandes, Frederico A.P. ; Quaresma, José M.V. ; Casteletti, Luiz C. ; Garcia, Amauri . Dendritic Arm Spacing Affecting Mechanical Properties and Wear Behavior of Al-Sn and Al-Si Alloys Directionally Solidified under Unsteady-State Conditions. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, v. 41, p. 972-984, 2010.
     
13. Osório, Wislei R. ; Peixoto, Leandro C. ; Canté, Manuel V. ; Garcia, Amauri . Electrochemical corrosion characterization of Al Ni alloys in a dilute sodium chloride solution. Electrochimica Acta, v. 55, p. 4078-4085, 2010.
     
14. Osório, Wislei R. ; Peixoto, Leandro C. ; Canté, Manuel V. ; Garcia, Amauri . Microstructure features affecting mechanical properties and corrosion behavior of a hypoeutectic Al Ni alloy. Materials in Engineering (Cessou em 1982. Cont. ISSN 0264-1275 Materials and Design), v. 31, p. 4485-4489, 2010.
     
15. OSÓRIO, W. R. R. ; PEIXOTO, L. C. ; GARCIA, A. . Electrochemical corrosion behaviour of a Ti-IF steel and a SAE 1020 steel in a 0.5 M NaCl solution. Materials and Corrosion, v. 61, p. 407-411, 2010.
     
16. Ferreira, Ivaldo L. ; Lins, Jefferson F.C. ; Moutinho, Daniel J. ; Gomes, Laércio G. ; Garcia, Amauri . Numerical and experimental investigation of microporosity formation in a ternary Al Cu Si alloy. Journal of Alloys and Compounds, p. 31-39, 2010.
     
17. OSÓRIO, W. R. R. ; PEIXOTO, L. C. ; GOULART, P. R. ; GARCIA, A. . Electrochemical corrosion parameters of as-cast Al-Fe alloys in a NaCl solution. Corrosion Science, v. 52, p. 2979-2993, 2010.
     
18. Silva, Adrina P. ; Spinelli, J., E. ; Mangelinck-Noël, Nathalie ; Garcia, Amauri . Microstructural development during transient directional solidification of hypermonotectic Al-Bi alloys. Materials in Engineering (Cessou em 1982. Cont. ISSN 0264-1275 Materials and Design), v. 31, p. 4584-4591, 2010.
     
19. Goulart, P.R. ; Spinelli, J.E. ; CHEUNG, N. ; Mangelinck-Nöel, N. ; Garcia, A. . Al Fe hypoeutectic alloys directionally solidified under steady-state and unsteady-state conditions. Journal of Alloys and Compounds, p. 205-210, 2010.
     
20. Pariona, Moisés M. ; Rugenski, Josuel K. ; Canté, Manuel V. ; Spinelli, José E. ; Garcia, Amauri . Thermal stress analysis of a directionally solidified Al 1wt%Ni alloy casting. Finite Elements in Analysis and Design, p. 889-895, 2010.

2009

1. CHEUNG, N ; SANTOS, N ; QUARESMA, J ; DULIKRAVICH, G ; GARCIA, A . Interfacial heat transfer coefficients and solidification of an aluminum alloy in a rotary continuous caster. International Journal of Heat and Mass Transfer, v. 52, p. 451-459, 2009.
    
2. CHEUNG, N. ; LAROSA, M. A. ; OSÓRIO, W. R. R. ; IERARDI, M. C. ; GARCIA, A. . Numerical Simulation and Experimental Analysis of Laser Surface Remelting of AISI 420 Stainless Steel Samples. Advanced Materials Research, v. 59, p. 265-268, 2009.
    
3. Goulart, Pedro R. ; Cruz, Kleber S. ; Spinelli, José E. ; Ferreira, Ivaldo L. ; Cheung, Noé ; Garcia, Amauri . Cellular growth during transient directional solidification of hypoeutectic Al Fe alloys. Journal of Alloys and Compounds, v. 470, p. 589-599, 2009.
    
4. Cruz, Kleber S. ; Ferreira, Ivaldo L. ; Spinelli, José E. ; Cheung, Noé ; Garcia, Amauri . Inverse segregation during transient directional solidification of an Al Sn alloy: Numerical and experimental analysis. Materials Chemistry and Physics, v. 115, p. 116-121, 2009.
    
5. Garcia, Leonardo R. ; Peixoto, Leandro C. ; Osório, Wislei R. ; Garcia, Amauri . Globular-to-needle Zn-rich phase transition during transient solidification of a eutectic Sn 9%Zn solder alloy. Materials Letters (General ed.), v. 63, p. 1314-1316, 2009.
    
6. Boeira, Alexandre P. ; Ferreira, Ivaldo L. ; Garcia, Amauri . Alloy composition and metal/mold heat transfer efficiency affecting inverse segregation and porosity of as-cast Al Cu alloys. Materials and Design, v. 30, p. 2090-2098, 2009.
    
7. Ferreira, Ivaldo L. ; Spinelli, José E. ; Garcia, Amauri . Gravity-driven inverse segregation during transient upward directional solidification of Sn Pb hypoeutectic alloys. Journal of Alloys and Compounds, v. 475, p. 396-400, 2009.
    
8. Silva, Adrina P. ; Spinelli, José E. ; Garcia, Amauri . Thermal parameters and microstructure during transient directional solidification of a monotectic Al Bi alloy. Journal of Alloys and Compounds, v. 475, p. 347-351, 2009.
    
9. Goulart, Pedro R. ; Lazarine, Valentim B. ; Leal, Claudenete V. ; Spinelli, José E. ; Cheung, Noé ; Garcia, Amauri . Investigation of intermetallics in hypoeutectic Al Fe alloys by dissolution of the Al matrix. Intermetallics (Barking), p. 753-761, 2009.  
    
10. Peixoto, Leandro C. ; Osório, Wislei R. ; Garcia, Amauri . Microstructure and electrochemical corrosion behavior of a Pb 1wt%Sn alloy for lead-acid battery components. Journal of Power Sources, p. 724-729, 2009.
     
11. Silva, Adrina P. ; Spinelli, José E. ; Garcia, Amauri . Microstructural evolution during upward and downward transient directional solidification of hypomonotectic and monotectic Al Bi alloys. Journal of Alloys and Compounds, p. 485-493, 2009.
     
12. Cheung, Noé ; Ferreira, Ivaldo L. ; Pariona, Moisés M. ; Quaresma, José M.V. ; Garcia, Amauri . Melt characteristics and solidification growth direction with respect to gravity affecting the interfacial heat transfer coefficient of chill castings. Materials and Design, p. 3592-3601, 2009.
     
13. Ferreira, Ivaldo L. ; Voller, Vaughan R. ; Nestler, Britta ; Garcia, Amauri . Two-dimensional numerical model for the analysis of macrosegregation during solidification. Computational Materials Science, p. 358-366, 2009.
     
14. Osório, Wislei R. ; Peixoto, Leandro C. ; Garcia, Amauri . Electrochemical corrosion of Pb 1wt% Sn and Pb 2.5wt% Sn alloys for lead-acid battery applications. Journal of Power Sources, p. 1120-1127, 2009.
     
15. CRUZ, K. S. ; CHEUNG, N. ; SPINELLI, J. E. ; CASTELETTI, L. C. ; GARCIA, A. . Influence of Solidification Microstructure on the Wear Resistance of Al-Si and Al-Sn alloys Directionally Solidified under Unsteady State Conditions. In: Friction, Wear and Wear Protection, 2009. Friction, Wear and Wear Protection. p. 597-603.

2008

1. OSORIO, W ; GOULART, P ; GARCIA, A . Effect of silicon content on microstructure and electrochemical behavior of hypoeutectic Al Si alloys. Materials Letters (General ed.), v. 62, p. 365-369, 2008.
    
2. OSORIO, W ; ROSA, D ; GARCIA, A . The roles of cellular and dendritic microstructural morphologies on the corrosion resistance of Pb Sb alloys for lead acid battery grids. Journal of Power Sources, v. 175, p. 595-603, 2008.
    
3. MARTINS, D ; OSORIO, W ; SOUZA, M ; CARAM, R ; GARCIA, A . Effects of Zr content on microstructure and corrosion resistance of Ti 30Nb Zr casting alloys for biomedical applications. Electrochimica Acta, v. 53, p. 2809-2817, 2008.
    
4. OSORIO, W ; CHEUNG, N. ; SPINELLI, J. E. ; CRUZ, K. S. ; GARCIA, A. . Microstructural modification by laser surface remelting and its effect on the corrosion resistance of an Al 9wt%Si casting alloy. Applied Surface Science, v. 254, p. 2763-2770, 2008.
    
5. CHEUNG, N ; BERTAZZOLI, R ; GARCIA, A . Experimental impurity segregation and numerical analysis based on variable solute distribution coefficients during multi-pass zone refining of aluminum. Journal of Crystal Growth, v. 310, p. 1274-1280, 2008.
    
6. OSÓRIO, W. R. R. ; SOUZA, M. E. ; FREIRE, C. M. A. ; GARCIA, A. . The Application of Electrochemical Impedance Spectroscopy to Investigate the Effect of As-Cast Structures on the Corrosion Resistance of Hypereutectic Zn-Al Alloys. Journal of New Materials for Electrochemical Systems, v. 11, p. 37-42, 2008.
    
7. CREMASCO, A ; OSORIO, W ; FREIRE, C ; GARCIA, A ; CARAM, R . Electrochemical corrosion behavior of a Ti 35Nb alloy for medical prostheses. Electrochimica Acta, v. 53, p. 4867-4874, 2008.
    
8. Canté, Manuel V. ; Spinelli, José E. ; Ferreira, Ivaldo L. ; Cheung, Noé ; Garcia, Amauri . Microstructural Development in Al-Ni Alloys Directionally Solidified under Unsteady-State Conditions. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, v. 39, p. 1712-1726, 2008.
    
9. CHEUNG, N. ; CRUZ, K. S. ; KHAN, N. H. ; GARCIA, A. . Numerical and Experimental Analysis of Laser Surface Remelting of Al 9wt%Si Alloy Samples. Materials Science Forum, v. 587/88, p. 721-725, 2008.
    
10. OSÓRIO, W. R. R. ; CHEUNG, N. ; GARCIA, L. R. ; GARCIA, A. . Corrosion Resistance of As-Cast and Quenched Samples of a Zn-22Al Eutectoid Alloy. Materials Science Forum, v. 587/88, p. 355-359, 2008.
     
11. OSÓRIO, W. R. R. ; ROSA, D. M. ; GARCIA, A. . A Influência da Microestrutura da Liga Pb-0,85%Sb em seu Comportamento Eletroquímico. Matéria (UFRJ), v. 13, p. 246-257, 2008.
     
12. CRUZ, K. S. ; CHEUNG, N. ; GARCIA, A. . Parâmetros Térmicos, Macroestrutura e Microestrutura na Solidificação Direcional da Liga Al-20%Sn. Tecnologia em Metalurgia e Materiais (São Paulo), v. 04, p. 21-26, 2008.
     
13. OSÓRIO, W. R. R. ; AOKI, C. S. C. ; GARCIA, A. . Effects of Microstructural Arrangement on Hot Corrosion Resistance of a Pb-Sb Alloy for Battery Grids. Materials Science Forum, v. 595/98, p. 851-859, 2008.
     
14. FERREIRA, I ; SPINELLI, J ; NESTLER, B ; GARCIA, A . Influences of solute content, melt superheat and growth direction on the transient metal/mold interfacial heat transfer coefficient during solidification of Sn Pb alloys. Materials Chemistry and Physics, v. 111, p. 444-454, 2008.
     
15. Rosa, Daniel M. ; Spinelli, José E. ; Ferreira, Ivaldo L. ; Garcia, Amauri . Cellular/Dendritic Transition and Microstructure Evolution during Transient Directional Solidification of Pb-Sb Alloys. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, v. 39, p. 2161-2174, 2008.
     
16. OSÓRIO, W. R. R. ; CHEUNG, N. ; SPINELLI, J. E. ; CRUZ, K. S. ; GOULART, P. R. ; GARCIA, A. . Thermally and Chemically Induced Microstructural Modifications Affecting the Electrochemical Corrosion Behavior of an Al-9wt%Si Casting Alloy. Journal of New Materials for Electrochemical Systems, v. 11, p. 205-212, 2008.
     
17. Osório, W. R. ; SPINELLI, J. E. ; Freire, C. M. ; Garcia, A. . Experimental analysis of corrosion resistance on columnar to equiaxed transition region of as cast structures of Al Cu alloys. Materials Science and Technology, v. 24, p. 1433-1437, 2008.
     
18. OSORIO, W ; AOKI, C ; GARCIA, A . Hot corrosion resistance of a Pb Sb alloy for lead acid battery grids. Journal of Power Sources, v. 185, p. 1471-1477, 2008.
     
19. CRUZ, K ; SPINELLI, J ; FERREIRA, I ; CHEUNG, N ; GARCIA, A . Microstructural development in Al Sn alloys directionally solidified under transient heat flow conditions. Materials Chemistry and Physics, p. 87, 2008.
     
20. OSÓRIO, W. R. R. ; GARCIA, L. R. ; PEIXOTO, L. C. ; GARCIA, A. . A Influência da Macrosegregação e da Variação dos Espaçamentos Dendríticos na Resistência à Corrosão da Liga Al-4,5% Cu. Matéria (UFRJ), v. 13, p. 542-552, 2008.

2007

1. CHEUNG, N ; BERTAZZOLI, R ; GARCIA, A . Numerical and experimental analysis of an approach based on variable solute distribution coefficients during purification by zone refining. Separation and Purification Technology, v. 52, p. 504-511, 2007.
    
2. QUARESMA, J ; CHEUNG, N ; GARCIA, A . The effect of solidification thermal variables on surface quality of Al Cu ingots. Journal of Alloys and Compounds, v. 428, p. 130-138, 2007.
    
3. OSORIO, W ; SPINELLI, J ; FERREIRA, I ; GARCIA, A . The roles of macrosegregation and of dendritic array spacings on the electrochemical behavior of an Al 4.5wt.% Cu alloy. Electrochimica Acta, v. 52, p. 3265-3273, 2007.
    
4. CANTE, M ; CRUZ, K ; SPINELLI, J ; CHEUNG, N ; GARCIA, A . Experimental analysis of the columnar-to-equiaxed transition in directionally solidified Al Ni and Al Sn alloys. Materials Letters (General ed.), v. 61, p. 2135-2138, 2007.
    
5. Osório, W. R. ; SPINELLI, J. E. ; Freire, C. M. ; Garcia, A. . The Role of Macrostructural and Microstructural Morphologies on the Corrosion Resistance of Zn and a Zn-4% Al Alloy. Materials and Manufacturing Processes, v. 22, p. 341-345, 2007.
    
6. GOULART, P. R. ; Osório, W. R. ; SPINELLI, J. E. ; Garcia, A. . Dendritic Microstructure Affecting Mechanical Properties and Corrosion Resistance of an Al-9 wt% Si Alloy. Materials and Manufacturing Processes, v. 22, p. 328-332, 2007.
    
7. SANTOS, G ; DEMOURANETO, C ; OSORIO, W ; GARCIA, A . Design of mechanical properties of a Zn27Al alloy based on microstructure dendritic array spacing. Materials and Design, v. 28, p. 2425-2430, 2007.
    
8. OSORIO, W ; SPINELLI, J ; FREIRE, C ; CARDONA, M ; GARCIA, A . The roles of Al2Cu and of dendritic refinement on surface corrosion resistance of hypoeutectic Al Cu alloys immersed in H2SO4. Journal of Alloys and Compounds, v. 443, p. 87-93, 2007.
    
9. Osório, Wislei R. ; Cheung, Noé ; Spinelli, José E. ; Goulart, Pedro R. ; Garcia, Amauri . The effects of a eutectic modifier on microstructure and surface corrosion behavior of Al-Si hypoeutectic alloys. Journal of Solid State Electrochemistry, v. 11, p. 1421-1427, 2007.
    
10. OSORIO, W ; GARCIA, L ; GOULART, P ; GARCIA, A . Effects of eutectic modification and T4 heat treatment on mechanical properties and corrosion resistance of an Al 9wt%Si casting alloy. Materials Chemistry and Physics, v. 106, p. 343-349, 2007.
     
11. Osório, Wislei R. ; Spinelli, José E. ; Boeira, Alexandre P. ; Freire, Célia M. ; Garcia, Amauri . The influences of macrosegregation, intermetallic particles, and dendritic spacing on the electrochemical behavior of hypoeutectic Al-Cu alloys. Microscopy Research and Technique, v. 70, p. 928-937, 2007.

2006

1. CHEUNG, N ; SANTOS, C ; SPIM, J ; GARCIA, A . Application of a heuristic search technique for the improvement of spray zones cooling conditions in continuously cast steel billets. Applied Mathematical Modelling, Grã-Bretanha, v. 30, n. 01, p. 104-115, 2006.
    
2. Santos, Carlos A. ; Garcia, Amauri ; Frick, Carlos R. ; Spim, Jaime A. . Evaluation of heat transfer coefficients along the secondary cooling zones in the continuous casting of steel billets. Inverse Problems in Science & Engineering, Alemanha, v. 14, p. 687-700, 2006.
    
3. OSORIO, W ; SPINELLI, J ; CHEUNG, N ; GARCIA, A . Secondary dendrite arm spacing and solute redistribution effects on the corrosion resistance of Al 10wt% Sn and Al 20wt% Zn alloys. Materials Science & Engineering. A, Structural Materials: properties, microstructure and processing, Grã Bretanha, v. 420, p. 179-186, 2006.
    
4. SPINELLI, J. E. ; ROCHA, O. F. L. ; GARCIA, A. . The Influence of Melt Convection on Dendritic Spacing of Downward Unsteady-State Directionally Solidified Sn-Pb Alloys. Materials Research, Brasil, v. 9, p. 51-57, 2006.
    
5. ROSA, D ; SPINELLI, J ; GARCIA, A . Tertiary dendrite arm spacing during downward transient solidification of Al Cu and Al Si alloys. Materials Letters (General ed.), Holanda, v. 60, p. 1871-1874, 2006.
    
6. GOULART, P ; SPINELLI, J ; OSORIO, W ; GARCIA, A . Mechanical properties as a function of microstructure and solidification thermal variables of Al Si castings. Materials Science & Engineering. A, Structural Materials: properties, microstructure and processing, Grã-Bretanha, v. 421, p. 245-253, 2006.
    
7. Souza, Eduardo N. ; Cheung, Noé ; Santos, Carlos A. ; Garcia, Amauri . The variation of the metal/mold heat transfer coefficient along the cross section of cylindrical shaped castings. Inverse Problems in Science & Engineering, Grã-Bretanha, v. 14, n. 05, p. 467-481, 2006.
    
8. Spinelli, José Eduardo ; Ferreira, Ivaldo Leão ; Garcia, Amauri . Evaluation of heat transfer coefficients during upward and downward transient directional solidification of Al Si alloys. Structural and Multidisciplinary Optimization, Grã-Bretanha, v. 31, n. no. 6, p. 241-248, 2006.
    
9. QUARESMA, J ; CHEUNG, N ; GARCIA, A . Experimental investigation of factors affecting surface quality of Al Cu alloys ingots. Materials Science & Engineering. A, Structural Materials: properties, microstructure and processing, v. 431, p. 201-205, 2006.
    
10. ROSA, D ; SPINELLI, J ; FERREIRA, I ; GARCIA, A . Cellular growth during transient directional solidification of Pb Sb alloys. Journal of Alloys and Compounds, v. 422, p. 227-238, 2006.
     
11. OSÓRIO, W. R. R. ; GOULART, P. R. ; SANTOS, G. A. ; MOURA NETO, C. ; GARCIA, A. . Effect of Dendritic Arm Spacing on Mechanical Properties and Corrosion Resistance of Al9wtpctSi and Zn27wtpctAl Alloys. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, v. 37, p. 2525-2538, 2006.
     
12. BOEIRA, A ; FERREIRA, I ; GARCIA, A . Modeling of macrosegregation and microporosity formation during transient directional solidification of aluminum alloys. Materials Science & Engineering. A, Structural Materials: properties, microstructure and processing, v. 435-436, p. 150-157, 2006.
     
13. ROSA, D ; SPINELLI, J ; OSORIO, W ; GARCIA, A . Effects of cell size and macrosegregation on the corrosion behavior of a dilute Pb Sb alloy. Journal of Power Sources, v. 162, p. 696-705, 2006.

2005

1. CHEUNG, N. ; PINTO, M. A. ; IERARDI, M. C. F. ; GARCIA, A. ; VILAR, R. . Steel Surface Treatment Using Laser Remelting: Mathematical Modeling and Experimental Analysis. Lasers in Engineering, Estados Unidos, v. 15, p. 41-53, 2005.
    
2. SPINELLI, J ; GARCIA, A . Analysis of current dendritic growth models during downward transient directional solidification of Sn?Pb alloys. Materials Letters (General ed.), Holanda, v. 59, p. 1691-1695, 2005.
    
3. DESOUZA, E ; CHEUNG, N ; SANTOS, C ; GARCIA, A . Factors affecting solidification thermal variables along the cross-section of horizontal cylindrical ingots. Materials Science & Engineering. A, Structural Materials: properties, microstructure and processing, Grã-Bretanha, v. 397, p. 239-248, 2005.
    
4. OSORIO, W ; FREIRE, C ; GARCIA, A . The effect of the dendritic microstructure on the corrosion resistance of Zn Al alloys. Journal of Alloys and Compounds, v. 397, p. 179-191, 2005.
    
5. SANTOS, C. A. ; CHEUNG, N. ; Garcia, A. ; Spim, J. A. . Application of a Solidification Mathematical Model and a Genetic Algorithm in the Optimization of Strand Thermal Profile Along the Continuous Casting of Steel. Materials and Manufacturing Processes, Estados Unidos, v. 20, p. 421-434, 2005.
    
6. SOUZA, E ; CHEUNG, N ; GARCIA, A . The correlation between thermal variables and secondary dendrite arm spacing during solidification of horizontal cylinders of Sn Pb alloys. Journal of Alloys and Compounds, Grã-Bretanha, v. 399, p. 110-117, 2005.
    
7. OSORIO, W ; FREIRE, C ; GARCIA, A . The role of macrostructural morphology and grain size on the corrosion resistance of Zn and Al castings. Materials Science & Engineering. A, Structural Materials: properties, microstructure and processing, Grã-Bretanha, v. 402, p. 22-32, 2005.
    
8. Santos, Carlos A ; Fortaleza, Eugênio L ; Ferreira, Carlos R F ; Spim, Jaime A ; Garcia, Amauri . A solidification heat transfer model and a neural network based algorithm applied to the continuous casting of steel billets and blooms. Modelling and Simulation in Materials Science and Engineering, Grã-Bretanha, v. 13, p. 1071-1087, 2005.
    
9. SPINELLI, J ; PERES, M ; GARCIA, A . Thermosolutal convective effects on dendritic array spacings in downward transient directional solidification of Al Si alloys. Journal of Alloys and Compounds, Grã-Bretanha, v. 403, p. 228-238, 2005.
    
10. OSÓRIO, W. R. R. ; SPINELLI, J. E. ; FREIRE, C. M. A. ; GARCIA, A. . Efeito da Macro e Micromorfologia Estruturais na Resistência à Corrosão de Amostras de Zn Puro e da Liga Zn-4%Al. Matéria (UFRJ), Brasil, v. 10, p. 428-436, 2005.
     
11. Osório, Wislei Riuper ; Freire, Célia Marina A. ; Garcia, Amauri . Dendritic solidification microstructure affecting mechanical and corrosion properties of a Zn4Al alloy. Journal of Materials Science, Grâ Bretanha, v. 40, n. 17, p. 4493-4499, 2005.
     
12. FERREIRA, I ; SPINELLI, J ; PIRES, J ; GARCIA, A . The effect of melt temperature profile on the transient metal/mold heat transfer coefficient during solidification. Materials Science & Engineering. A, Structural Materials: properties, microstructure and processing, Grã Bretanha, v. 408, p. 317-325, 2005.
     
13. CHEUNG, N. ; PINTO, M. A. ; IERARDI, M. C. F. ; Garcia, A. . Numerical and experimental analysis of laser surface remelting of Al 15Cu alloy samples. Surface Engineering, Grã-Bretanha, v. 21, n. 5-6, p. 473-479, 2005.
     
14. ROSA, D. M. ; SPINELLI, J. E. ; FERREIRA, I. L. ; GARCIA, A. . A Influência da Convecção no Líquido nos Espaçamentos Dendríticos Primários e Secundários na Solidificação Vertical Descendente de Ligas Al-Cu. Tecnologia em Metalurgia e Materiais, São Paulo, v. 02, n. 02, p. 6-11, 2005.
     
15. GARCIA, A. . Influência das Variáveis Térmicas de Solidificação na Formação da Macroestrutura e da Microestrutura e Correlação com Propriedades Decorrentes. Projeções (Bragança Paulista), Brasil, v. 23, p. 13-32, 2005.
     
16. PINTO, M. A. ; OSÓRIO, W. R. R. ; LIMA, C. R. P. ; GARCIA, A. ; IERARDI, M. C. F. . Laser Surface Treatment of Plasma Sprayed Yttria-stabilized Zirconia Coatings. Revista de Metalurgia, Espanha, v. extr, p. 154-159, 2005.
     
17. OSÓRIO, W. R. R. ; FREIRE, C. M. A. ; GARCIA, A. . Different Immersion Periods and Aqueous Solutions Effects upon the Corrosion Resistance of Zn and Al Specimens. Revista de Metalurgia, Espanha, v. extr, p. 160-164, 2005.
     
18. OSÓRIO, W. R. R. ; SIQUEIRA, C. ; FREIRE, C. M. A. ; GARCIA, A. . Effects of the Longitudinal and Transversal Structural Grain Morphologies upon the Corrosion Resistance of Zn and Al Specimens. Revista de Metalurgia, Espanha, v. extr, p. 176-180, 2005.

Anos Anteriores

FERREIRA, I ; Garcia, A. ; NESTLER, B. . On macrosegregation in ternary Al Cu Si alloys: numerical and experimental analysis. Scripta Materialia (Oxford), Grã Bretanha, v. 50, n. 4, p. 407-411, 2004.

Spim, Jaime A. ; Santos, Carlos A. ; QUARESMA, J ; SIQUEIRA, C ; Garcia, Amauri . Metal-mold heat transfer coefficients during horizontal and vertical Unsteady-State solidification of Al-Cu and Sn-Pb Alloys. Inverse Problems in Science & Engineering, Grã Bretanha, v. 12, n. 3, p. 279-296, 2004.

FERREIRA, I. L. ; SANTOS, C. A. ; VOLLER, V. R. ; GARCIA, A. . Analytical, Numerical and Experimental Analysis of Inverse Macrosegregation during Upward Unidirectional Solidification of Al-Cu Alloys. Metallurgical and Materials Transactions B, Estados Unidos, v. 35B, n. April, p. 285-297, 2004.

SA, F ; ROCHA, O ; SIQUEIRA, C ; GARCIA, A . The effect of solidification variables on tertiary dendrite arm spacing in unsteady-state directional solidification of Sn Pb and Al Cu alloys. Materials Science & Engineering. A, Structural Materials: properties, microstructure and processing, Grã Bretanha, v. 373, p. 131-138, 2004.

FERREIRA, I. L. ; SIQUEIRA, C. ; SANTOS, C. A. ; GARCIA, A. . Influence of Metal/mold Heat Transfer Coefficient on the Inverse Macrosegregation Profile of an Al 6.2wt % Cu Alloy Unidirectionally Solidified. Materials Science Forum, Suiça, v. 456, p. 728-732, 2004.

SPINELLI, J ; TOSETTI, J ; SANTOS, C ; SPIM, J ; GARCIA, A . Microstructure and solidification thermal parameters in thin strip continuous casting of a stainless steel. Journal of Materials Processing Technology, Grã Bretanha, v. 150, p. 255-262, 2004.

SPINELLI, J ; ROSA, D ; FERREIRA, I ; GARCIA, A . Influence of melt convection on dendritic spacings of downward unsteady-state directionally solidified Al?Cu alloys. Materials Science & Engineering. A, Structural Materials: properties, microstructure and processing, Grã Bretanha, v. 383, p. 271-282, 2004.

PERES, M ; SIQUEIRA, C. ; Garcia, A. . Macrostructural and microstructural development in Al?Si alloys directionally solidified under unsteady-state conditions. Journal of Alloys and Compounds, Grã Bretanha, v. 381, p. 168-181, 2004.

PIRES, J. C. ; GARCIA, A. . Modification of Oxide Inclusions Present in Aluminum-killed Low Carbon Steel by Addition of Calcium. Revista da Escola de Minas, Brasil, v. 57, p. 183-189, 2004.

CHEUNG, N. ; GARCIA, A. . Correlação entre Estrutura de Solidificação e Propriedades Decorrentes. Metalurgia e Materiais, São Paulo, v. 60, n. 550, p. 694-697, 2004.

PIRES, J. C. ; GARCIA, A. . Study of the Nature of Non-Metallic Inclusions in Samples of Aluminum and Silicon Killed Low Carbon Steels, Collected in the Refining Treatment and Continuous Casting Stages. Materials Research, Brasil, v. 07, p. 517-521, 2004.

SPINELLI, J. E. ; PERES, M. D. ; GARCIA, A. . Efeito da Convecção no Líquido nos Espaçamentos Dendríticos Terciários de Ligas Al-Si. Projeções (Bragança Paulista), São Paulo, v. 21/22, p. 45-52, 2004. 

SPINELLI, J ; Garcia, A. ; FERREIRA, I. L. . Influence of melt convection on the columnar to equiaxed transition and microstructure of downward unsteady-state directionally solidified Sn?Pb alloys. Journal of Alloys and Compounds, v. 384, p. 217-226, 2004.

Osório, W ; SANTOS, C. A. ; QUARESMA, J. M. V. ; Garcia, A. . Mechanical properties as a function of thermal parameters and microstructure of Zn Al castings. Journal of Materials Processing Technology, Grã-Bretanha, v. 143-144, n. C, p. 703-709, 2003.

ROCHA, O ; SIQUEIRA, C ; GARCIA, A . Cellular/dendritic transition during unsteady-state unidirectional solidification of Sn Pb alloys. Materials Science & Engineering. A, Structural Materials: properties, microstructure and processing, Irlanda, v. 347, n. 1-2, p. 59-69, 2003.

SIQUEIRA, C ; Garcia, A. ; CHEUNG, N . The columnar to equiaxed transition during solidification of Sn Pb alloys. Journal of Alloys and Compounds, Irlanda, v. 351, n. 1-2, p. 126-134, 2003.

ROCHA, O. F. L. ; SIQUEIRA, C. ; GARCIA, A. . Heat Flow Parameters Affecting Dendrite Spacings during Unsteady-State Solidification of Sn-Pb and Al-Cu Alloys. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, Estados Unidos, v. 34A, n. abril, p. 995-1006, 2003.

CHEUNG, N. ; PINTO, M. A. ; IERARDI, M. C. F. ; GARCIA, A. . Development and Experimental Validation of a Numerical Thermal Model for the Evaluation of the Depth of Laser Treated Zone in the Laser Transformation Hardening Process. Materials Science Forum, Suiça, v. 425, p. 707-712, 2003.

FERREIRA, I ; SIQUEIRA, C ; SANTOS, C. A. ; Garcia, A. . Theoretical and experimental analysis of inverse segregation during unidirectional solidification of an Al 6.2 wt.% Cu alloy. Scripta Materialia (Oxford), Reino Unido, v. 49, p. 339-344, 2003.

Pinto, M ; CHEUNG, N. ; IERARDI, M. C. ; Garcia, A. . Microstructural and hardness investigation of an aluminum copper alloy processed by laser surface melting. Materials Characterization, Grã-Bretanha, v. 50, n. 2-3, p. 249-253, 2003.

ROCHA, O ; SIQUEIRA, C ; GARCIA, A . Cellular spacings in unsteady-state directionally solidified Sn Pb alloys. Materials Science & Engineering. A, Structural Materials: properties, microstructure and processing, Grã-Bretanha, v. 361, p. 111-118, 2003.

SANTOS, C ; Spim, J. A. ; Garcia, A. . Mathematical modeling and optimization strategies (genetic algorithm and knowledge base) applied to the continuous casting of steel. Engineering Applications of Artificial Intelligence, Grã Bretanha, v. 16, n. 5-6, p. 511-527, 2003.

Fernandes, M ; PIRES, J. C. ; CHEUNG, N. ; Garcia, A. . Influence of refining time on nonmetallic inclusions in a low-carbon, silicon-killed steel. Materials Characterization, Grã Bretanha, v. 51, p. 301-308, 2003.

OSORIO, W ; GARCIA, A . Modeling dendritic structure and mechanical properties of Zn Al alloys as a function of solidification conditions. Materials Science & Engineering. A, Structural Materials: properties, microstructure and processing, Estados Unidos, v. 325, p. 103-111, 2002.

SIQUEIRA, C. ; CHEUNG, N. ; GARCIA, A. . Solidification Thermal Parameters Affecting the Columnar to Equiaxed Transition. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, Estados Unidos, v. 33A, p. 2107-2118, 2002.

PIRES, J. C. ; FERNANDES NETO, M. ; GARCIA, A. . Avaliação do Tamanho, da Morfologia e da Composição Química de Inclusões Não-Metálicas em Aço Carbono Desoxidado ao Alumínio. Revista da Escola de Minas, Ouro Preto, v. 55, n. n0. 1, p. 25-29, 2002.

Fernandes, M ; CHEUNG, N ; Garcia, A. . Investigation of nonmetallic inclusions in continuously cast carbon steel by dissolution of the ferritic matrix. Materials Characterization, Grã-Bretanha, v. 48, p. 255-261, 2002.

FERNANDES NETO, M. ; PINTO, F. N. ; PIRES, J. C. ; GARCIA, A. . Investigação de Inclusões Não Metálicas em Fios Elétricos de alumínio. Revista da Escola de Minas, Ouro Preto, v. 55, n. no. 2, p. 97-101, 2002.

SANTOS, C ; IERARDI, M. C. ; Spim, J. A. ; Garcia, A. . The use of artificial intelligence technique for the optimisation of process parameters used in the continuous casting of steel. Applied Mathematical Modelling, Irlanda, v. 26, n. 11, p. 1077-1092, 2002.

ROCHA, O. F. L. ; SIQUEIRA, C. ; GARCIA, A. . Theoretical-Experimental Analysis of the Cellular/Dendritic Transition During Unidirectional Solidification of Sn-Pb Alloys. Materials Research, São Carlos - SP, v. 05, n. no. 3, p. 391-397, 2002.

SPINELLI, J. E. ; SANTOS, C. A. ; SPIM JR, J. A. ; GARCIA, A. . Modelagem Física do Sistema de Alimentação do Processo Twin-Roll para Lingotamento Contínuo de Tiras de Aço Inoxidável. Revista da Escola de Minas, v. 55, n. jul/set, p. 179-184, 2002.

Fernandes, M ; PIRES, J. C. ; Cheung, Noé ; Garcia, A. . Investigation of the chemical composition of nonmetallic inclusions utilizing ternary phase diagrams. Materials Characterization, Grã Bretanha, v. 49, p. 437-443, 2002.

CHEUNG, N ; Garcia, A. . The use of a heuristic search technique for the optimization of quality of steel billets produced by continuous casting. Engineering Applications of Artificial Intelligence, Inglaterra, v. 14, n. 2, p. 229-238, 2001.

SANTOS, C ; QUARESMA, J ; Garcia, A. . Determination of transient interfacial heat transfer coefficients in chill mold castings. Journal of Alloys and Compounds, Inglaterra, v. 319, p. 174-186, 2001.

SPIM, J ; Garcia, A. . Numerical analysis of solidification of complex shaped bodies: coupling of mesh elements of different geometries. Materials Science & Engineering. A, Structural Materials: properties, microstructure and processing, Estados Unidos, v. 277, p. 198-205, 2000.

SANTOS, C ; Spim, J. A. ; Garcia, A. . Modeling of solidification in twin-roll strip casting. Journal of Materials Processing Technology, Inglaterra, v. 102, n. 1-3, p. 33-39, 2000.

SPIM, J ; BERNADOU, M. J. S. ; Garcia, A. . Numerical modeling and optimization of zone refining. Journal of Alloys and Compounds, Inglaterra, v. 298, p. 299-305, 2000.

VICENTIN, L. C. ; IERARDI, M. C. ; GARCIA, A. ; VILAR, R. . Laser Welding of Low Carbon Steel Blanks. Lasers in Engineering, Inglaterra, v. 10, p. 183-192, 2000.

SPIM JR, J. A. ; GARCIA, A. . A Modified Network Approach for Modeling Solidification of Complex Shaped Domains. Numerical Heat Transfer. Part B, Fundamentals, Estados Unidos, v. 38, p. 75-92, 2000.

CHEUNG, N. ; IERARDI, M. C. F. ; GARCIA, A. ; VILAR, R. . The Use of Artificial Intelligence for the Optimization of a Laser Transformation Hardening Process. Lasers in Engineering, Inglaterra, v. 10, p. 275-291, 2000.

QUARESMA, J. M. ; SANTOS, C. A. ; GARCIA, A. . Correlation Between Unsteady-State Solidification Conditions, Dendrite Spacings, and Mechanical Properties of Al-Cu Alloys. Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, Estados Unidos, v. 31A, p. 3167-3178, 2000.

SANTOS, C. A. ; CHEUNG, N. ; GARCIA, A. ; SPIM JR, J. A. . Enfoque Numerico de La Solidificacion de Geometrias Complejas Basado En Analogias Entre Sistemas Termicos Y Eletricos. Información Tecnológica, CHILE, v. 10, n. 01, p. 251-256, 1999.

SPIM JR, J. A. ; SANTOS, C. A. ; GARCIA, A. . Analisis Numerico de Secciones Radiales en la Fundicion de Geometrias complejas. Información Tecnológica, Chile, v. 10, n. 03, p. 133-138, 1999.

IERARDI, M. C. ; GARCIA, A. ; COSTA, A. ; VILAR, R. . Structural Aspects And Mechanical Properties Induced By Laser Surface Remelting of A Tool Steel. Lasers in Engineering, Inglatera, v. 09, p. 47-56, 1999.

AZZOLINI, W. ; IERARDI, M. C. ; GARCIA, A. ; VILAR, R. . Laser Cladding of a Martensite Stainless Steel on a Tool Steel Substrate. Lasers in Engineering, Inglaterra, v. 09, p. 229-235, 1999.

FERNANDES NETO, M. ; CHEUNG, N. ; GARCIA, A. . Characterization of Non-Metallic Inclusions in Carbon Steel Samples Produced by Continuous Casting. Acta Microscópica, v. 8, p. 247-248, 1999.

PAULA, M. ; GARCIA, A. ; MOURA, C. ; MELO, F. C. L. . Purificação do Telúrio Pelo Método de Fusão Zonal. Revista Brasileira de Aplicações de Vácuo, v. 17, p. 47-51, 1998.

SANTOS, R. G. ; GARCIA, A. . Thermal Behaviour During The Inward Solidification Of Cylinders And Spheres And Correlation With Structural Effects. International Journal of Cast Metals Research, INGLATERRA, v. 11, p. 187-195, 1998.

SPIM JR, J. A. ; GARCIA, A. . An Optimization Of The Finite Difference Method For Modeling Solidification Of Complex Shapes. Revista Brasileira de Ciências Mecânicas, v. XIX, n. 3, p. 392-409, 1997.

AZOLINI, W. ; IERARDI, M. C. ; GARCIA, A. ; VILAR, R. . Laser Cladding: Nova Alternativa No Tratamento de Superficies. Metalurgia e Materiais, SÃO PAULO, v. 52, p. 407-410, 1996.

IERARDI, M. C. ; GARCIA, A. ; COSTA, A. ; VILAR, R. . Aspectos Macro e Microestruturais Induzidos Por Fusão Superficial Com Laser Em Aço Ferramenta. Metalurgia e Materiais, SÃO PAULO, v. 51, p. 522-527, 1995.

GARCIA, A. ; IERARDI, M. C. . Modelagem Matemática Aplicada na Simulação, Otimização e Controle de Processos que Envolvem a Solidificação. Boletim da Sociedade Brasileira de Matemática, Brasil, v. 04, p. 41-49, 1993.

GARCIA, A. ; SILVA, M. J. . Otimização do Processo de Fusão Zonal de Materiais. Metalurgia e Materiais, São Paulo, v. 48, p. 140-147, 1992.

CARAM JR, R. ; IERARDI, M. C. ; GARCIA, A. . Modelagem Numérica Aplicada à Solidificação de Peças Metálicas no Processo deFundição. Metalurgia e Materiais, São Paulo, v. 44, p. 442-445, 1988.

IERARDI, M. C. ; CARAM, R. ; GARCIA, A. . Modelamento Matemático da Solidificação no Processo de Lingotamento Contínuo. Metalurgia e Materiais, São Paulo, v. 42, p. 521-524, 1986.

BERTAZZOLI, R. ; CARAM, R. ; GARCIA, A. . Purificação de Metais e Compostos Orgânicos: Uma Otimização. Metalurgia e Materiais, São Paulo, v. 40, p. 507-509, 1984.

SANTOS, R. G. ; GARCIA, A. . Analytical Technique for The Determination of Solidification Rates During The Inward Freezing of Cylinders. Journal of Materials Science, Inglaterra, v. 18, p. 3578, 1983.

BERTAZZOLI, R. ; GARCIA, A. . Purificação de Metais por Fusão Zonal Horizontal: Análise Teórica e Experimental. Metalurgia e Materiais, São Paulo, v. 39, p. 15-18, 1983.

CLYNE, T. W. ; GARCIA, A. ; ACKERMAN, P. ; KURZ, W. . The Use of Empirical, Analytical and Numerical Models to Describe Solidification of Steel During continuous casting. Journal of Metals, Estados Unidos, v. x, p. 35, 1982.

GARCIA, A. ; LIPTON, J. . An Analytical Solution of Directional Solidification With Mushy Zone. Archiv Fur das Eisenbuttenwesen, Alemanha, v. 53, p. 469, 1982.

GARCIA, A. ; CLYNE, T. W. . Application Of A New Solidification Model To Splat Cooling. Journal of Materials Science, Inglaterra, v. 16, p. 1643, 1981.

GARCIA, A. ; CLYNE, T. W. . Assesment of a New Model for Heat Flow During Unidirectional Solidification of Metals. International Journal of Heat and Mass Transfer, Inglaterra, v. 23, p. 773, 1980.

GARCIA, A. ; CLYNE, T. W. ; PRATES, M. . Mathematical Model For The Unidirectional Solidification Of Metals: II Massive Molds. Metallurgical and Materials Transactions B, Estados Unidos, v. 10B, p. 82, 1979.

GARCIA, A. ; PRATES, M. . Cálculo dos Tempos e da Distribuição de Temperaturas na Solidificação de Não-Ferrosos em Moldes Refrigerados a Água. Metalurgia e Materiais, São Paulo, v. 35, p. 677-683, 1979.

GARCIA, A. ; DAVIES, G. J. ; PRATES, M. . A Comparison of Mathematical Solutions for the Solidification Rate of Ingots in Water Cooled Molds. Ciência e Cultura (SBPC), São Paulo, v. 31, p. 541-547, 1979.

GARCIA, A. ; PRATES, M. . Mathematical Model For The Unidirectional Solidification of Metals: I Cooled Molds. Metallurgical and Materials Transactions B, Estados Unidos, v. 9B, p. 449, 1978.

GARCIA, A. ; SANTOS, R. G. ; PRATES, M. . Transferência de Calor do Sistema Metal/molde no Refino da Estrutura de Solidificação do Silumin. Metalurgia e Materiais, São Paulo, v. 34, p. 249-253, 1978.

GARCIA, A. ; CAMPOS, C. A. ; PRATES, M. . Controle da Solidificação Direcional de Lingotes de Ligas Al-Cu. Metalurgia e Materiais, São Paulo, v. 33, p. 323-327, 1977.

GARCIA, A. ; PRATES, M. . Correlação entre a Velocidade de Solidificação e a Macroestrutura de Lingotes do Eutético Sn-Pb Solidificados Unidirecionalmente. Ciência e Cultura (SBPC), São Paulo, v. 29, p. 436-466, 1977.

GARCIA, A. ; PRATES, M. . Influência de Parâmetros de Transferência de Calor na Solidificação do Eutético Sn-Pb. Metalurgia e Materiais, São Paulo, v. 32, p. 509-514, 1976.

GARCIA, A. . Ensaios Mecânicos: Convencional ao Real. Dirigente Industrial, São Paulo, p. 20-24, 1975.

Patentes

- SILVA, G. M. ; CANDIDO, P. H. V. ; BERTELLI, F. ; SILVA-SANTOS, C. H. ; GARCIA, A. ; CHEUNG, N. . Autonomous Microstructure Recognition and Measurement by Machine Learning (AMR&MML). 2022.

Patente: Programa de Computador. Número do registro: BR512022002496-9, data de registro: 09/09/2022, título: "Autonomous Microstructure Recognition and Measurement by Machine Learning (AMR&MML)" , Instituição de registro: INPI - Instituto Nacional da Propriedade Industrial.

Produção Acadêmica

• Publicação Bibliográfica: 565
  • Artigos publicados em periódicos: 370
    • Periódicos nacionais: 34
    • Periódicos internacionais: 336
  • Trabalhos completos publicados em anais de eventos: 188
    • Eventos nacionais: 137
    • Eventos internacionais: 48
  • Livros ou capítulos de livros: 7
    • Livros: 3
    • Capítulos de livros: 4

• Orientações concluídas
  • Dissertações de mestrado: 33
  • Teses de doutorado: 49
  • Iniciação científica: 36
  • Outras orientações: 17
• Orientações em andamento: 13

Prêmios