LOPES, É.S.N. ; CAMPO, K.N. ; STARCK, L.F. ; CARAM, R. . Role of the aging procedure on the ω + β microstructure in the metastable β Ti-30Nb-3Fe alloy. MATERIALS LETTERS, v. 374, p. 137192, 2024. https://doi.org/10.1016/j.matlet.2024.137192
MACEDO, NADIA ; GALANTE, MIGUEL ; SOARES, LEONARDO ; ALVIM, JÉSSICA ; LIMA, VANDERLEI ; SANGALI, MARCIO ; RODRIGUES, JOÃO ; CARAM JR., RUBENS ; LONGO, CLAUDIA . Complex Oxides Synthesized via Arc Furnace: a Fast, Direct and Effective Approach to Obtain Functional Materials. JOURNAL OF THE BRAZILIAN CHEMICAL SOCIETY, v. 35, p. 1-13, 2024. https://dx.doi.org/10.21577/0103-5053.20240140
CAMPO, KAIO N. ; WISCHI, MATHEUS ; RODRIGUES, JOÃO F.Q. ; STARCK, LETICIA F. ; SANGALI, MARCIO C. ; CARAM, RUBENS . Directional solidification of the Al0.8CrFeNi2.2 eutectic high-entropy alloy. Journal of Materials Research and Technology-JMR&T, v. 30, p. 8874-8881, 2024. https://doi.org/10.1016/j.jmrt.2024.05.257
NIITSU CAMPO, KAIO ; QUEIROZ RODRIGUES, JOÃO FELIPE ; MOON, SUK-CHUN ; DIPPENAAR, RIAN ; CARAM, RUBENS . Solidification and microstructure investigation on as-cast and annealed hypoeutectic Ti-Fe alloys. MATERIALS CHEMISTRY AND PHYSICS, v. 322, p. 129613, 2024. https://doi.org/10.1016/j.matchemphys.2024.129613
CELLES, CÍCERO ANDRADE SIGILIÃO ; TEIXEIRA, ANA BEATRIZ VILELA ; VALENTE, MARIANA LIMA DA COSTA ; SILVA, MÁRCIO SANGALI CRISTINO DA ; RODRIGUES, JOÃO FELIPE QUEIROZ ; CARAM, RUBENS ; DOS REIS, ANDRÉA CÂNDIDO . Effect of post-processing and variation of the building angle of Ti-6Al-4V disks obtained by selective laser melting: a comparison of physical, chemical and mechanical properties to machined disks. Materials Today Communications, v. 29, p. 108700, 2024. https://doi.org/10.1016/j.mtcomm.2024.108700
SANGALI, M. ; RODRIGUES, J.F.Q. ; CAMPO, K.N. ; STARCK, L.F. ; CREMASCO, A. ; CONTIERI, R.J. ; CARAM, R. . Fine-layered CP-Ti /Ti-6Al-4V composites by laser powder bed fusion. VACUUM, v. 220, p. 112831, 2024. http://dx.doi.org/10.1016/j.vacuum.2023.112831
DE MATTOS, F.N. ; DA SILVA, A.J.P.M. ; SANGALI, M. ; RODRIGUES, J.F.Q. ; CARAM, R. ; AFONSO, C.R.M. . Unraveling composition graded microstructure of in-situ alloyed Ti-15Nb alloy through laser powder bed fusion. MATERIALS LETTERS, v. 358, p. 135776, 2024. http://dx.doi.org/10.1016/j.matlet.2023.135776
MELO, C.C. ; SILVA, L.S. ; CREMASCO, A. ; CARAM, R. . TiO2 nanostructured layer formation on Ti-35Nb and Ti-35Nb-5Ta samples: Impact of Ta addition on polymorphic transformation and oxide composition. MATERIALS LETTERS, v. 355, p. 135450, 2024. https://doi.org/10.1016/j.matlet.2023.135450.
PRANDI, GILBERTO V. ; RODRIGUES, JOÃO FELIPE Q. ; VALENTIM, MATHEUS ; SANGALI, MÁRCIO ; STARCK, LETÍCIA F. ; SOYAMA, JULIANO ; CARAM, RUBENS . Hybrid titanium alloys produced by laser powder bed Fusion using Ti-5553 and Ti-42Nb powder recycling. Journal of Materials Research and Technology-JMR&T, v. 27, p. 8281-8291, 2023. http://dx.doi.org/10.1016/j.jmrt.2023.11.208
SANGALI, MARCIO ; OPINI, VICTOR C. ; FATICHI, ALBERTO Z. ; MELLO, MARIANA G. ; FANTON, LEONARDO ; R. CARAM ; CREMASCO, A. . Nb modified Ti-5553 alloy: Effects of heating rate on mechanical properties, corrosion behavior, and crystallographic texture. Journal of Materials Research and Technology-JMR&T, v. 23, p. 5310-5317, 2023. http://dx.doi.org/10.1016/j.jmrt.2023.02.138
DA COSTA, FERNANDO HENRIQUE ; SALLICA-LEVA, EDWIN ; MELLO, MARIANA GERARDI ; AMIGÓ, VICENTE ; CARAM, RUBENS ; FOGAGNOLO, JOÃO BATISTA . Stiffness and hardness gradients obtained by laser surface treatment of aged β-Ti alloys: The role of ω phase. SURFACE & COATINGS TECHNOLOGY, v. 467, p. 129697, 2023. http://dx.doi.org/10.1016/j.surfcoat.2023.129697
DE LIMA, DALTON DANIEL ; CAMPO, KAIO NIITSU ; CARAM, RUBENS . Coupling thermodynamic simulation and thermal analysis to select Sn-Bi alloys for semisolid additive manufacturing. JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, v. 148, p. 1-11, 2023. http://dx.doi.org/10.1007/s10973-023-12337-4
STARCK, LETICIA F. ; MELO, MARIA FERNANDA C. DE ; LANCINI, ISABELLA C. ; SILVA, MARCIO S.C. DA ; RODRIGUES, JOÃO FELIPE Q. ; CREMASCO, ALESSANDRA ; CARAM, RUBENS . Intergranular and Intragranular Precipitation on Continuous Cooling in Metastable β Ti-19Nb-2.5Fe-6Sn Alloy. MATERIALS RESEARCH, v. 26, p. e20230091, 2023. http://dx.doi.org/10.1590/1980-5373-mr-2023-0091
OPINI, VICTOR CARVALHO; FOGAGNOLO, JOÃO BATISTA; BORRÁS, VICENTE AMIGÓ; CARAM, RUBENS; SOYAMA, JULIANO. Powder metallurgy processing of Nb-modified near β titanium alloys prepared with elemental powders. POWDER METALLURGY, v. 66, p. 1-7, 2023. http://dx.doi.org/10.1080/00325899.2023.2228093
STARCK, L.F. ; SANGALI, M. ; DE MELO, M.F.C. ; OPINI, V.C. ; LOPES, E.S.N. ; CARAM, R. . Enhancing fine-scale α phase precipitation and mechanical behavior by addition of Cu to metastable β Ti-5553 alloy. MATERIALS LETTERS, v. 351, p. 134968, 2023. http://dx.doi.org/10.1016/j.matlet.2023.134968
SANGALI, MARCIO ; CREMASCO, ALESSANDRA ; SOYAMA, JULIANO ; CARAM, RUBENS ; CONTIERI, RODRIGO J. . Selective Laser Melting of Ti-6Al-4V Alloy: Correlation Between Processing Parameters, Microstructure and Corrosion Properties. MATERIALS RESEARCH, v. 26, p. e20230055, 2023. http://dx.doi.org/10.1590/1980-5373-mr-2023-0055
CAMPO, K.N. ; COURY, F.G. ; Caram, R. . Microstructure and compression properties of semisolid CrCuFeMnNi high-entropy alloys. MATERIALS LETTERS, v. 351, p. 135093, 2023. http://dx.doi.org/10.1016/j.matlet.2023.135093
FATICHI, ALBERTO Z. ; DE MELLO, MARIANA G. ; PEREIRA, KARINA D. ; ANTONIO, LUÍSA G.M. ; LUCHESSI, AUGUSTO D. ; CARAM, RUBENS ; CREMASCO, ALESSANDRA . Crystalline phase of TiO2 nanotube arrays on Ti-35Nb-4Zr alloy: Surface roughness, electrochemical behavior and cellular response. CERAMICS INTERNATIONAL, v. 48, p. 5154-5161, 2022. https://doi.org/10.1016/j.ceramint.2021.11.054
TAIPINA, MÁRCIA O. ; DE MELLO, MARIANA G. ; TAMBORLIN, LETICIA ; PEREIRA, KARINA D. ; LUCHESSI, AUGUSTO D. ; CREMASCO, ALESSANDRA ; CARAM, RUBENS . A novel Ag doping Ti alloys route: Formation and antibacterial effect of the TiO2 nanotubes. MATERIALS CHEMISTRY AND PHYSICS, v. 261, p. 124192, 2021. https://doi.org/10.1016/j.matchemphys.2020.124192
DOS ANJOS, SÉRGIO ; DA COSTA, FERNANDO HENRIQUE ; SALLICA-LEVA, EDWIN ; CARAM, RUBENS ; AMIGÓ, VICENTE ; FOGAGNOLO, JOÃO BATISTA . Laser surface alloying applied on Ti-3Mo and Ti-10Nb sintered parts. SURFACE & COATINGS TECHNOLOGY, v. 407, p. 126773, 2021. https://doi.org/10.1016/j.surfcoat.2020.126773
LOPES, E.S.N. ; SANTOS, L.U. ; CARAM, R. ; CAMPO, K.N. . Achieving high strength and low Young?s modulus in martensitic Ti-Nb-O alloys. MATERIALS LETTERS, v. 301, p. 130308, 2021. https://doi.org/10.1016/j.matlet.2021.130308
UMBELINO DOS SANTOS, LUIS ; CAMPO, KAIO NIITSU ; CARAM, RUBENS ; NAJAR LOPES, ÉDER SÓCRATES . Oxygen addition in biomedical Ti-Nb alloys with low Nb contents: Effect on the microstructure and mechanical properties. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v. 823, p. 141750, 2021. https://doi.org/10.1016/j.msea.2021.141750
SALVADOR, CAMILO A. F. ; DAL BO, MARIANA R. ; LIMA, DALTON D. ; MIRANDA, CAETANO R. ; CARAM, RUBENS . Experimental and computational investigation of Ti-Nb-Fe-Zr alloys with limited Fe contents for biomedical applications. JOURNAL OF MATERIALS SCIENCE, v. 56, p. 11494-11510, 2021. https://doi.org/10.1007/s10853-021-06002-0
TAYAR GALANTE, MIGUEL ; 'IVKOVI', ALEKSANDAR ; ALVIM, JÉSSICA COSTA ; CALCHI KLEINER, CINTHIA CRISTINA ; SANGALI, MÁRCIO ; TAYLOR, S. F. REBECCA ; GREER, ADAM J. ; HARDACRE, CHRISTOPHER ; RAJESHWAR, KRISHNAN ; Caram, Rubens ; BERTAZZOLI, RODNEI ; MACALUSO, ROBIN T. ; DE LEEUW, NORA H. ; LONGO, CLAUDIA . Arc Synthesis, Crystal Structure, and Photoelectrochemistry of Copper(I) Tungstate. ACS Applied Materials & Interfaces, v. 13, p. 32865-32875, 2021. https://doi.org/10.1021/acsami.1c03928
CAMPO, KAIO NIITSU ; DE FREITAS, CAIO CHAUSSÊ ; DA FONSECA, EDUARDO BERTONI ; CARAM, RUBENS . CrCuFeMnNi high-entropy alloys for semisolid processing: The effect of copper on phase formation, melting behavior, and semisolid microstructure. MATERIALS CHARACTERIZATION, v. 178, p. 111260, 2021. https://doi.org/10.1016/j.matchar.2021.111260
Mais publicações na ResearcherID C-2068-2012