The railroad is a form of land transportation that is found in almost every country in the world. Railroads serve many thousands of communities, from big cities in Europe, Asia, and North America to tiny villages in Africa and Australia. Railroads carry travelers to and from neighboring communities or on trips across whole continents. They carry raw materials and farm products to manufacturing and processing plants, and they carry the finished products from those plants to warehouses and stores.

Railroads were designed to move large numbers of passengers or large amounts of freight over long distances. The railroad is the most efficient method of land transportation because it requires the least amount of fuel and human labor and is the least damaging to the environment. Railroads carry about 40 percent of the total volume of freight transportation in the United States.

The world has a total of more than 14 million miles (22 million kilometers) of railroad line. Almost all the railroad systems carry both freight and passengers. A railroad is much like a manufacturing business whose sole product is transportation service. To produce that product it requires tracks, cars, locomotives, repair shops, communication systems, and skilled workers.

From ancient times until the early 1800s, the only way to move loads overland was by using the physical strength of people and animals. Freight had to be carried in single vehicles, each pulled by one or more animals (usually horses) and controlled by a driver. Little freight could be carried, and the trip was slow, hazardous, and time-consuming.

The railroad introduced two innovations into land transportation. One was the locomotive, which concentrated in a single unit the pulling power of many horses. The other, which made use of this increased power, was the practice of linking many separate vehicles, or cars, into trains.

Underlying these two new elements was a third the track, or road of rails. Today, the track is still the backbone of the railroads. It must be strong enough to support the weight of the trains and smooth enough to offer minimum friction to rolling wheels. Other strong, smooth surfaces, such as highways, could do these two jobs, but the raised, parallel rails of track also perform a third and unique task: they guide the trains as the vehicles move along the track.

There were tracks before there were trains and locomotives. In Central Europe during the 1500s, short wooden tracks, or wagonways, connected mines and quarries with nearby streams. On such tracks horses drew far heavier loads than they could pull on ordinary roads. These short tramways, later built of iron, were introduced in England in the early 1600s.

First Use of Locomotives

In 1803 Richard Trevithick, a British mining engineer, planned and built a steam locomotive. His engine actually pulled a short train of cars uphill on a coal-mine railway in Wales. In the years after Trevithick's locomotive, several others were built for use on various British coal-mine railways.

The world's first common carrier railroad (that is, one for public use) to use steam power was the Stockton and Darlington in England. It was designed and built by George Stephenson and opened for public service in 1825. In 1829, in the famous locomotive trials held at Rainhill, England, on the Liverpool and Manchester Railway, the Rocket, built by Stephenson and his son Robert, showed its superiority as a steam locomotive. Though not the first such locomotive, it was the beginning of effective steam power.

First Railroads in America

American colonists also built short tramways for hauling stone or coal. In 1804 Oliver Evans (who had built an amphibious steam-powered scow with wheels) declared that he could "make a steam carriage that will run 15 miles an hour on good, level railways." As early as 1812 Col. John Stevens, of Hoboken, N.J., began to speak for a new kind of "rail-way." He wanted one that would furnish long-range transportation, linking distant sections of the nation. In 1815 Stevens obtained the first charter to build a railroad across New Jersey, but he was unable to raise the money needed to build it.

The first common carrier railroad to be built in the United States was the Baltimore and Ohio. It was chartered in 1827 and construction started on July 4, 1828. The first steam locomotive to run in the United States, the English-built Stourbridge Lion, made a trial trip over the tracks of the Delaware and Hudson Canal Company in Pennsylvania in 1829. The engine was too heavy for the track and the trip was not repeated. In the summer of 1830 service began on the Baltimore and Ohio, with horses providing the power.

Finally, in December 1830 an American-built locomotive, the Best Friend of Charleston, hauled a train of cars on the tracks of the South Carolina Railroad. The new operation combined the four essentials of track, trains, mechanical power, and common carrier service. The railroad had come to America.

Railroads Cross the Continent

Railroads were born in England, a country of dense population, short distances, and large financial resources. In England problems were very different from those in America, which in the early 1800s was a nation of great distances, sparse population, and limited capital. Americans had to learn to build railroads for their own country by actual experience; they could not copy English methods.

The first American railroads started from the Atlantic ports of Boston, Mass.; New York City; Philadelphia, Pa.; Wilmington, Del.; Baltimore, Md.; Charleston, S.C.; and Savannah, Ga. Within 20 years four rail lines had crossed the Alleghenies to reach their goal on the "Western Waters" of the Great Lakes or on the tributaries of the Mississippi. Meanwhile other lines had started from west of the mountains, and by the mid-1850s Chicago, Ill.; St. Louis, Mo.; and Memphis, Tenn., were connected with the East. Still other lines were stretching westward beyond the Mississippi. An international route connected New England and Montreal, Que., and another one crossed southern Ontario between Niagara, N.Y., and the Detroit River.

During the 1850s north-south routes were developed both east and west of the Alleghenies. It was not until after the American Civil War, however, that a permanent railroad bridge (as distinguished from a temporary wartime structure) was constructed across the Ohio River.

After the Civil War the pace of railroad building increased. The two Pacific railroads one, the Union Pacific, building westward from Omaha, Neb.; the other, the Central Pacific, building eastward from Sacramento, Calif. had been started during the war to help promote national unity. They were joined at Promontory, Utah, on May 10, 1869, completing the first rail connection across the continent.

Development of Modern American Railroads

Between 1850 and 1871 the United States government made grants-in-aid of vacant lands to railroads to assist the extension of lines in the West and South, often ahead of settlement. About 8 percent of the country's railroad mileage was built with the aid of these land grants. The grants were not outright gifts; in return, the railroads were required to haul government traffic at reduced rates. When Congress terminated this arrangement in 1946, it was estimated that the railroads had repaid the government about ten times the original value of the land grants.

By 1870, when the railroad movement in the United States was 40 years old, there were 53,000 miles (85,000 kilometers) of line. (A mile of line, or route mile, is a measure of length of single main track, not including second and other multiple tracks, sidings, passing tracks, or yards.) Between 1870 and 1880 another 40,000 miles (64,000 kilometers) were added. The decade from 1880 to 1890 saw the most rapid expansion of American rail lines, with 70,000 miles (113,000 kilometers) added an average of 19 miles (31 kilometers) of new railroad completed each day. Growth continued, with another 30,000 miles (48,000 kilometers) added in the 1890s and another 47,000 miles (76,000 kilometers) in the next decade. By 1910 the network was largely complete and there was little further extension. In 1916 total railroad-line mileage in the United States reached its highest point at 254,000 miles (409,000 kilometers).

After 1920, with the rapid expansion of paved roads, much traffic was taken from the railroads by automobiles, buses, and trucks, though the overall demand for railroad service remained high. As a result, the railroad network began to shrink as lines that could no longer pay their way were abandoned. By the end of the 1980s, railroad-line miles in the United States had dropped to about 150,000 miles (241,000 kilometers).

Some of the lines had been built to serve mines, forests, or other nonrenewable natural resources and were abandoned when the resources were exhausted. Other lines had been built to serve an anticipated need that never materialized. Still other lines disappeared because the industries they had been built to serve entered a period of decline or relocated to other parts of the country.

By the late 1980s, American railroads had become primarily high-volume freight carriers operating on long-distance, main-line corridors. Intercity passenger traffic had largely been taken over by automobiles, buses, and airlines. Much freight, especially on the shorter distance hauls, was being carried by trucks. Yet the total railroad freight volume, as measured in ton-miles (a ton-mile is a unit of measurement corresponding to one ton of freight carried one mile) set a new all-time record in 1990 78 percent more than in 1960.

Building a Railroad

Before a railroad is built there are usually several alternative routes to be considered. Maps, aerial photographs, and profiles showing the features of each route are prepared and carefully studied. Experts then choose what they consider to be the best route. The choice they make has much to do with the success or failure of the new railroad line.

One route may be fairly level, requiring only a few cuts through hills and fills through valleys. Such a route, however, may require a long tunnel to get through an intervening mountain or several expensive bridges to get over rivers. This would make it more costly in the end than one with moderate cuts and fills all the way. Another route, though less expensive to build, may run through unsettled country. Hence it may be wiser to build the more expensive line for the sake of the greater local business it can get.

The selected route is then surveyed carefully, and building commences. Sometimes work parties begin at each end and build toward the middle, as was the case with the transcontinental railroad in the United States. The completed track carries trains with supplies for the construction workers. Today parties can be stationed at various points and receive supplies from other railroads already built nearby. This method gets the road finished and earning money much more quickly.

The first step is the preparation of the roadbed. Following the stakes and plans set up by the surveyors, the working parties clear away trees, make cuts and fills, and otherwise prepare the way. Other workers set up bridges and dig tunnels. As fast as the roadbed is ready, the track is laid, either by hand or by machines that feed the ties out on a belt and put the rails in position. Working on level ground, tracklayers can complete several miles in a day. Finally, the track must be ballasted, preferably with gravel, cinders, or stone.

In the United States the usual practice was to build a single-track line with as few tunnels, bridges, and expensive cuts and fills as possible. When the railroad began earning money, short cuts, called air lines, were made to eliminate sections of winding track that were built to avoid tunneling or grading. Then the track was doubled, first at portions where most trains passed and finally over the entire route, and thus the railroad grew into a first-class line. This method was largely responsible for the development of great railroads in the United States. Companies built roads through the open frontier. Soon communities appeared along the lines, and new businesses were started. These enabled the railroads to prosper. While track undergoes constant maintenance and improvement, there has been very little new construction in the United States in recent years, and it is estimated that the existing track system could carry 25 percent more traffic. In some areas, new communications and train control systems have allowed the elimination of double tracks in favor of single-track operations.

From Wooden to Steel Track

The earliest track was built of wooden stringers faced with iron straps or they were made of short iron rails fastened to stone blocks. Neither type proved satisfactory. By 1831 a new kind of construction had been worked out by Robert L. Stevens of the Camden and Amboy, in New Jersey. Stevens devised the so-called "T" rail (in cross section it looks more like an "I"). Its flat base could be fastened by hook-headed spikes to wooden crossties, which supported the rails and held them in line and at the right distance apart.

Despite many improvements in design and construction, the basic track ideas of the 1830s have continued in use. Rail has changed from iron to steel and has grown in length, height, and weight and in strength, safety, and wearing qualities. The life of crossties has been more than trebled by impregnating them under pressure with preservative chemicals. Some are made of concrete rather than of wood. Protective tie plates between rail and tie are in universal use in main-line tracks, and resilient pads between plates and ties are widely used. Joints and fastenings have been improved in design and strength. Along many miles of track, joints have been largely eliminated by welding rails end-to-end into long, unbroken ribbons of steel.

In the early days, each railroad built its track at whatever width, or gauge, it pleased and then built its engines and cars to fit that gauge. The tracks at the Killingworth Colliery, for which George Stephenson built his first locomotive, happened to be 4 feet 8 inches (1.42 meters) between rails, so Stephenson built his locomotive for this gauge. When he designed the Stockton and Darlington he made the locomotive the same width but added another half inch (1.3 centimeters) to the width of track. This odd measurement of 4 feet 8 1/2 inches (1.44 meters) in time came to be known as standard gauge.

Other tracks in England ranged between 2 and 7 feet (0.6 and 2.1 meters). In the United States the early railroad tracks ranged from 3 to 6 feet (0.9 to 1.8 meters) in width. This variance became unacceptable with the demand for connecting lines and through service.

Freight soon began to move longer distances and over the lines of more than one railroad. The differences in gauges forced the costly nuisance of unloading and reloading cars. Most of the lines in the area between New York City and Chicago were of nearly the same gauge between 4 feet 8 inches and 4 feet 10 inches (1.47 meters). Thus, in the 1860s, arrangements were made to use cars specially equipped with broad-tread wheels that could be used on any of these widths. About the same time, the movement toward standardization of the 4 feet 8 1/2 inch, or Stephenson, gauge received great encouragement when the United States Congress adopted it for the new Pacific railroad.

By the mid-1880s there was virtually a double standard of gauge in the United States. In the North and West the Stephenson gauge prevailed, while most of the South used a gauge of 5 feet (1.52 meters). Starting in 1886, the Southern lines narrowed their tracks to the now standard gauge of 4 feet 8 1/2 inches. This uniformity soon ensured an uninterrupted flow of commerce over the entire nation. Standard gauge is also used in Canada, Mexico, and Cuba, which was once linked with railroads on the mainland by freight-car ferry. No other continent has a comparable standardization, however.

Developing Better Locomotives

While extending their lines, railroads were also developing better locomotives, improved cars, and more efficient methods of operation. The first ten years of railroading in the United States saw the development of the American type of locomotive, the ancestor of a long and varied line of engines. The American was an eight-wheel locomotive with a four-wheel leading truck and two pairs of driving wheels that were coupled by means of side rods. The addition of a third pair of driving wheels resulted in the Ten-Wheeler. Like the American, it was an all-purpose locomotive designed for either freight or passenger service.

After the Ten-Wheeler, the wheel arrangements of locomotives intended for different classes of service developed in different ways. In freight service, the four-wheel leading truck was replaced by a single two-wheel leading truck, creating the type known as the Mogul. Adding a fourth pair of drivers created the Consolidation type. This type, in turn, evolved into the Mikado by the addition of a trailing axle. This axle supported the larger and wider firebox needed to meet the demand for more power. A fifth pair of drivers distinguished the Santa Fe. The use of a four-wheel trailing truck (to support a still-larger firebox) instead of a two-wheel trailing axle marked the Texas type.

Meanwhile, demands for still-greater concentrated power brought the Mallet locomotive from Europe in the early 1900s. The Mallet was essentially two engines under one long boiler that supplied steam for both. The early Mallets were compounds. In them the steam was first used at high pressure in small cylinders then exhausted into large cylinders where it was used again at low pressure. The need for greater speeds resulted in the simple Mallet, which used high-pressure steam in all four cylinders.

Passenger and Fast-Freight Equipment

With the evolution of the freight locomotives there was a parallel development of passenger power. The four-wheel leading truck was retained on almost all passenger types. The addition of a larger firebox, carried on a trailing axle, made the American into the Atlantic. A similar addition to the Ten-Wheeler created the Pacific. Adding a fourth pair of drivers to the Pacific created the Mountain type. Finally, the addition of a four-wheel trailing truck to carry a still-larger firebox made the Mountain into a type variously named but most commonly known as the 4-8-4, with four small wheels in front, eight driving wheels, and four small wheels behind. The 4-8-4, like the American and the Ten-Wheeler, which were the common ancestors of all locomotives, was developed as a dual-purpose engine. It had power enough for fast freight service and speed enough for heavy passenger service.

At the same time special engines were being developed for switching service. These did not need either leading trucks or leading axles, such as were required on road engines, and did not need the high sustained steaming power that called for extra-large fireboxes. Thus the switcher type put all its weight, and hence all its driving power, on small, close-coupled drivers.

Modifications in wheel arrangements indicate only some of the changes made in the steam locomotive. Better ways to make steam and better ways to control and use it at high temperatures made possible locomotive units weighing as much as 500 tons. These giants could produce as much as 7,000 horsepower and were capable of pulling mile-long trains at a mile-a-minute speed.

Use of Electric Power

In 1888 Frank J. Sprague completed the first extensive electric street railway in the United States. It was a 12-mile (19-kilometer) line in Richmond, Va.

In 1895 electric locomotives were introduced. These drew their power from central generating stations through overhead wires or charged third rails. The first use of such power was in a long tunnel under the city of Baltimore; most of the early uses of electricity were confined to difficult tunnel or terminal locations where steam locomotion was impractical. Central-station electric locomotion made possible such developments as the Pennsylvania Station and Grand Central Terminal in New York City, the underwater tunnels under the Detroit River, and the intensive development of zones of electrified suburban service around New York City, Philadelphia, and Chicago.

Central-station electrification has not been widely used for long distance, over-the-road service in the United States. Its main use is in areas of high density traffic such as between New York City and the cities of Washington, D.C.; Harrisburg, Pa.; and New Haven, Conn. Electrified trains are, however, quite common throughout Europe.

American railroads were also electrified by the adoption of the diesel-electric, or simply diesel, locomotive. The diesel is an electric locomotive that carries its own power plant. Thus, it needs no outside generating plant, overhead wires, or third rail. The diesel was first used in switching service in 1925. In 1934 a diesel engine powered one of the first streamlined trains. The diesel was introduced in heavy road freight service in 1941. With the close of World War II, the American railroads quickly changed to diesel power; the changeover was completed by about 1960.

The changeover to diesel power was rapid because diesel locomotives have several advantages over steam locomotives. They need much less maintenance, so railroads with diesels require far fewer repair shops and maintenance workers. Diesel locomotives can also start a train moving more quickly than steam locomotives can, and they cause less damage to the track. In addition, they are more flexible several diesel locomotive units can be combined as needed under the control of one engineer.

In the years after World War II, American railroads also tried other types of motive power. A number of electric-drive locomotives were built in which a turbine, fueled by gas, oil, coal, or powdered coal, replaced the diesel engine. Diesel-hydraulic locomotives, which use a hydraulic transmission instead of an electric drive, were also tried. However, none of these proved to be economical or reliable.

Diesel locomotives are found on railroads all over the world. Some of the busiest railroads, however including lines in Europe, Russia, and Japan use central-station electrification. In some of the less-developed countries steam locomotives are still used.

Operating Cars in Trains

Besides track and the locomotive there is a third basic element in railroading cars in trains. In order to operate cars in trains, there must be some means of coupling and uncoupling the cars, absorbing the push and pull of cars working together, and applying and releasing brakes. Furthermore, cars owned by different railroad companies must be able to work together in trains.

Early inventors were busy making devices for quick, simple coupling of cars. In the United States, the simple link-and-pin coupler soon came into general use, but it was dangerous because a worker had to go between the cars to couple and uncouple them. In 1887 the link-and-pin coupler was largely replaced by the knuckle-type automatic coupler, developed by Maj. Eli Janney. The basic Janney design is still in use today, though in a much-refined form, and similar couplers are used in many other countries, including China and Russia. To absorb the push-pull shocks between cars as they run coupled together in trains, various forms of draft gear are installed between the couplers and underframes of the cars.

In Europe automatic couplers are not widely used. Instead, cars are usually coupled by means of a hand-operated turnbuckle and screw. European cars have projecting buffers that absorb the pushing shocks.

The problem of how to stop long trains quickly, smoothly, and safely was not solved until the invention of the straight air brake by George Westinghouse in 1869. A modification of his brake system, the automatic air brake, was made compulsory in the United States in 1893. The automatic air brake maintains constant air pressure throughout the train. To slow or stop the train the engineer opens the brake valve. This decreases the air pressure and applies the brakes on all the cars. The vacuum brake, used primarily in Great Britain, works in just the opposite way: increased air pressure causes all brakes to be applied.

Operating Many Trains at Once

To safely control the operation of trains moving in different directions and at different speeds, railroads have developed intricate systems of communications and signaling. Many early American railroads were operated on the basis of a timetable system. The table indicated when each train was due at each station and which classes of trains had the right of way over other classes. However, the timetable system could not account for extra trains or for delays due to equipment failure or other causes. Beginning in the 1850s, the timetable instructions were modified and supplemented by telegraphic train orders, which were sent from a central train dispatcher to wayside telegraph operators, who handed them to the train crews. This timetable-train order system, which seeks to keep trains separated by time intervals, is still in use on some light-traffic lines. However, the telephone has replaced the telegraph in transmitting train orders, and on many lines orders are sent by radio directly to trains.

Keeping trains separated by space intervals, or blocks, provides additional protection against collisions. A block may be any length from a few hundred yards to several miles. Originally, operators located at the boundaries of the blocks set signals to tell trains whether the block ahead was clear or occupied. The electric track circuit, invented by William Robinson in 1871, made possible the automatic block system, which is used today on most major lines.

The track circuit is one of the earliest examples of automation. In this system, the presence of a train in a block acts on an electric current in the rails to set up signals at least two blocks ahead. These signals warn approaching trains. The warnings are indicated by the position of semaphores (which are now increasingly rare) or by the color or position of lights located on masts or bridges alongside or above the tracks. Thus, each train automatically operates its own warning signals and sets up its own zones of protection. Electronic enhancements of the automatic block system include cab signals, in which the wayside signals are repeated in the cab before the eyes of the locomotive engineer, and automatic train control, in which the brakes are automatically applied if the engineer should accidentally miss a stop signal. Some high-speed lines eliminate wayside signals altogether and use only cab signals.

Centralized Traffic Control, or CTC, is another system that is widely used on heavy-traffic American railroads and on railroads in many other parts of the world. Under CTC each train automatically reports its position and movements by means of lights that appear on a track map in front of the train dispatcher or operator. With this information, the dispatcher can arrange and issue orders for train movements simply by pushing buttons. In this manner the dispatcher is able to set signals or throw switches at passing tracks, some of them hundreds of miles away.

In the 1980s computers began handling most of the routine dispatching functions, thus permitting a single dispatcher or operator to oversee and direct much larger segments of a railroad. Several large American railroads began using highly centralized traffic control in which all traffic control activity, covering many thousands of line miles, are concentrated in one central office. Late in the decade, various railroads began testing advanced traffic control systems. Some of these systems use transponders in the track to determine train location and speed, while others use radio signals from satellites.

Because their operations are complex and spread over wide areas, railroad companies have always been eager to adopt better communications systems. They were among the early users of the telegraph, telephone, punch-card data processing machines, and computers. In the years after World War II, most trains were equipped with two-way radios so that the crew aboard the train could communicate with other trains and with wayside operators, dispatchers, and supervisors. From the mid-20th century, high-capacity microwave radio systems were replacing lineside telephone wires. More recently, some railroads have begun using fiber-optic cables to accommodate the large flow of data to and from powerful computers.

Classification, or Marshaling, Yards

The various systems for sending orders and information are most intensively used at large freight terminals. Here incoming trains are broken up and then reassembled into outbound trains headed for different destinations. These terminals are called classification, or marshaling, yards. Larger marshaling yards usually classify or sort cars with the aid of gravity. Incoming trains first enter the arrival yard, where the locomotives are removed. Then switch engines push the cars up a small hill, or hump. At the top of the hump, each car or group of cars is uncoupled and allowed to roll down the hill into the bowl. The bowl may have as many as 50 parallel classification tracks, each assigned to cars headed for a particular city or terminal. As each car rolls toward the bowl, switches are thrown to direct it to the proper destination track.

To build an outbound train, a switch engine withdraws all the cars that have accumulated on particular bowl tracks and assembles them into new trains in the departure yard. Here a road locomotive is attached and, after the cars are checked and the brakes tested, the train departs.

The operation of most advanced marshaling yards is largely controlled by computers. Information about incoming trains is fed into the yard's computer system, which produces a switch list that is then used by the person who uncouples the cars at the top of the hump. The computer also programs the switches so that each car is automatically directed to the proper bowl track. At smaller terminals, the process of classifying cars and building new trains is done by switch engines working in flat yards, without a hump, and having little or no electronic equipment.

In the 1980s, the importance of classification yards began to diminish because of the pressure of competition from other forms of transportation and the changing character of railroad traffic. Intermodal trains, for example, carry cargo packed in truck trailers or marine containers. They operate to and from special intermodal yards, where the trailers and containers are transferred between the railcars and waiting trucks or ocean carriers. Such trains are not usually broken up and reclassified en route. Many trains that carry bulk commodities also travel directly from origin to destination.

Passenger and Freight Cars

Railroads may carry passengers or freight. The earliest railroad passenger cars were simply stagecoaches equipped with flanged wheels. Likewise, the first freight cars were merely converted wagons. Today, however, railroads operate a wide variety of cars designed for specific types of service.

Railroads offer two basic types of passenger service: commuter and intercity. Commuter service is provided for people who live in suburbs and work in nearby cities. Intercity trains usually run between two large cities, called end points, that are 100 miles (160 kilometers) or more apart. Some intercity trains may cross an entire continent on a route that passes through several countries. Some local trains stop at all or most of the stations between the end points, but most intercity trains stop only at the larger cities on the route.

Commuter trains have coaches designed to carry as many people as possible. Some commuter coaches have two levels of seats and can carry as many as 150 passengers. The coaches of intercity trains are more roomy; they seat about 50 or 60 people and have reclining seats for greater comfort on long trips. Many long-haul intercity trains also have sleeping cars, which have small rooms with fold-down beds for use on overnight runs, dining cars to provide passengers with full meals during the trip, and lounge cars to furnish refreshments and light meals.

Freight cars can be classified into three basic types: the boxcar, or house car; the open-top car; and the flatcar. Today railroads use many variations of these basic types along with many special cars designed to carry specific types of freight.

Boxcars are used to carry merchandise or other freight that must be protected from the weather. Some boxcars have cushioned draft gear to protect fragile shipments from damage during transport. Open-top cars are used mainly to carry minerals, such as coal or iron ore. Many have hopper doors that allow the cargo to be unloaded through the bottom of the car. Others are designed to be unloaded by turning the entire car upside down in a huge car-dumper machine. Flatcars open cars with no side panels can handle a wide variety of freight, including steel beams, packaged lumber, farm machinery, long poles, construction equipment, and other large, heavy materials.

To better serve shippers and to compete with highway trucking, railroads may run special types of cars. In the United States, the movement of highway trailers or marine containers on intermodal flatcars has become the fastest growing segment of the railroad business. Efficient double-stack trains carrying containers stacked one atop the other became widely used during the 1980s. Among other specialized cars are auto-rack cars, which carry up to 21 finished automobiles or small trucks; tank cars for hauling petroleum, liquid chemicals, and gases; covered hopper cars to carry grain or chemicals; and refrigerated boxcars, or reefers, to carry perishable produce.

Railroad Organization and Regulation

In the United States a railroad is organized much like any other business with stockholders, a board of directors, and a president. In most other countries the government, rather than individual stockholders, owns the company.

A typical large railroad in the United States is divided into three major departments marketing and sales, operations, and executive. The marketing and sales department works with present and potential customers to determine what rail services they might use and what the prices, or rates, for those services should be. The operations department, in which the majority of railroad employees work, is responsible for producing the services needed to obtain the railroad's business. The executive department performs a number of functions that include accounting and finance, legal matters, public relations, management information systems that is, computer systems and personnel.

Although different railroads often compete with each other, they may cooperate to meet the needs of passengers and shippers. For example, through trains that may transport passengers over two or more railroads are common in Europe, and in North America the freight cars of any railroad can operate on any other line. Of course, standardization of track gauge is vital for this kind of cooperation, but car components, particularly brakes and couplers, must also be compatible. To achieve and maintain this compatibility, railroads in North America work through the Association of American Railroads. The association sets the standards for cars that are to be interchanged among railroads. In Europe, the Union Internationale des Chemins de Fer (International Union of Railways) performs similar functions.

Most of the early railroads in the world were built as privately owned businesses operated for profit. However, they quickly became so powerful that governments began to regulate their activities. Railroads were required to get government permits in order to build new lines. Soon laws in many countries began to prescribe standards for safe operation standards that regulated signaling, brakes, steam-locomotive boilers, track construction and maintenance, and employee training and work hours. Governments also began to regulate the financial activities of railroads. Railroads had to get governmental approval in order to set rates and fares, merge with other railroads, issue stocks and bonds, or alter train schedules.

Strict regulation was satisfactory as long as the railroads had what amounted to a monopoly in land transportation. However, when highway trucking, pipelines, and airlines began to take business away from the railroads, governmental regulation prevented the railroads from responding effectively to the new competition. As a result, many railroads ran into financial difficulties. Most countries responded by nationalizing their railroad systems and having their governments pay the railroads' operating losses from tax revenues. By the 1950s the railroads in virtually all countries except the United States (and one of the large railroads in Canada) had been nationalized.

In 1971, with the formation of the National Railroad Passenger Corporation, known as Amtrak, intercity railroad passenger services in the United States began to receive government support. Most passenger commuter operations also receive funding from the states or localities they serve. Recognizing that the freight railroads could no longer continue as private businesses under the existing governmental regulation, the United States Congress passed the Staggers Rail Act of 1980. This law reduced or eliminated much of the earlier regulation of rates and services and gave the railroads more freedom to compete with other types of transportation.

Railroad Modernization

In nearly all countries the growth of highway and air transportation has changed the role of the railroads. Like their younger competitors, the railroads have become specialized carriers that concentrate on the types of transportation for which they are best suited. Railroads are particularly efficient at moving large volumes of bulk commodities such as coal or ore over long distances and transporting marine containers and piggyback highway trailers. Railroads are also efficient at carrying commuter passengers between suburbs and city centers and providing comfortable, fast intercity passenger services.

New technologies in design, materials, and methods have helped railroads become still more efficient. After World War II, for example, strong concrete crossties replaced wooden ties on many railroads, especially in Europe. Rail welded into long sections became the standard for most busy main lines. By the 1960s high-speed passenger trains were introduced.

Japan's so-called "bullet train" was in the forefront of the new technology. It began operating on Oct. 1, 1964, to mark Asia's first Olympic Games, which were held in Tokyo. The first section of the fabled Shinkansen (New Trunk Line, known as the New Tokaida Line) was a 320-mile (515-kilometer) stretch between Tokyo and Osaka. A 100-mile (160-kilometer) extension from Osaka to Okayama was completed in 1972, and the final segment a 244-mile (393-kilometer) run to the Hakata station in Fukuoka, northern Kyushu opened in 1975. Other lines, completed in 1982, radiate north of Tokyo to Niigata and Morioka. The Shinkansen was privatized in 1987.

France's TGV became the supertrain of the 1970s and 1980s. It set a new world speed record of 320 miles an hour in 1990. The newer ten-car TGV trains are powered by front and rear electric locomotives. Computerized controls provide on-board signalization and fail-safe braking.

Some of the other countries where superspeed trains are running or planned are Great Britain, Germany, Italy, Sweden, Finland, Ireland, Australia, Canada, and the United States. Metroliners make daily three-hour trips between New York City and Washington, D.C.; although the trains are capable of faster runs up to 160 miles (260 kilometers) per hour, drawbacks on the existing line hold speeds to a maximum of 100 miles (160 kilometers) per hour. The first major North American project planned was to link the Florida cities of Miami, Orlando, and Tampa, but a proposed Texas line, from Dallas to Houston, may produce the continent's first bullet train.

Several American railroads operate trains of RoadRailers, vehicles that have both rail and highway wheels. On the railroad they run coupled together in trains pulled by locomotives, then are separated and moved by highway tractors to their final destinations.

Among the more advanced systems proposed is the magnetic levitation, or maglev, train. Instead of wheels or steel rails, the system uses coils in the surface of the track, or guideway, to create a magnetic field that lifts the vehicles and propels them forward. By the late 1980s only short test systems had been built in Germany and Japan. Successful experimental runs were first made in the early 1990s using locomotives powered by natural gas more environmentally friendly than the normal diesel-powered ones.

Some Special Passenger Trains

American-European Express. Orient-Express-style luxury train that operated between Chicago and Washington, D.C. from 1989 to 1991. Used elegantly renovated Pullman cars from the 1930s, 1940s, and 1950s. Art Deco club car featured live entertainment.

Blue Train. Long considered the most luxurious train in the world. Leisurely 26-hour trip once or twice a week between Pretoria and Cape Town, South Africa.

Indian Pacific. Australian luxury train. Crosses the continent, from Sydney to Perth, in 2 3/4 days.

Orient-Express. Called Venice-Simplon-Orient-Express after the route was extended in 1919, it was Europe's first transcontinental express train, for years unmatched in luxuriousness and comfort. Used by many novelists as a backdrop for mystery and romance. From 1883 to 1977, with interruptions during the world wars, it ran from Paris to Constantinople (now Istanbul), Turkey. Short runs are still made over portions of the original route.

Rheingold. Fine German train. Runs between Amsterdam, The Netherlands, and Basel, Switzerland, following the Rhine River and stopping at such cities as Cologne, Mainz, and Munich.

Rossiya. The Trans-Siberian Railroad's express. Daily through train making a week-long trip between Moscow and Vladivostok (see Trans-Siberian Railroad).

Shinkansen (New Trunk Line). Japan's supertrain, which achieved speeds up to 130 miles (210 kilometers) per hour on original Tokyo-Osaka run. Extensions were added in the 1970s, 1980s, and early 1990s. The fastest trains, called Hikari (Light), reach more than 160 miles (260 kilometers) per hour on the newer sections.

TGV (Train a Grande Vitesse). World's fastest, smoothest trains, operated by the French government. Early versions covered the 267 miles (430 kilometers) between Paris and Lyon in two hours. Newer models are designed to run up to 250 miles (402 kilometers) per hour. Various lines link Paris with Toulouse (the Capitole), with Nice (the Mistral), and with coastal cities, including Brest (the Atlantique).

BIBLIOGRAPHY FOR RAILROAD

Ammon, Richard. Trains at Work (Macmillan Child Group, 1993).

Armstrong, J.H. The Railroad: What It Is, What It Does (Simmons-Boardman Books, 1990).

Behrend, George. Luxury Trains: From the Orient Express to the TGV (Vendome, 1982).

Coiley, John. Train (Knopf, 1992).

Cooper, Alan. Rail Travel (Thomson Learning, 1993).

Drury, George. Guide to Tourist Railroads and Railroad Museums (Kalmbach, 1990).

Elish, Dan. The Transcontinental Railroad (Millbrook Press, 1993).

Freezer, Cyril. Model Railroads: The Complete Guide to Designing, Building, and Operating a Model Railway (Courage Books, 1991).

Jeffries, David. Trains: The History of Railroading (Watts, 1991).

McNeese, Tim. America's First Railroads (Macmillan Child Group, 1993).

Source: Compton's Interactive Encyclopedia